Product Specification
14" X 1/8" (5/32") X 20MM T1 HIGH SPEED GAS SAW WHEEL - 10 PACK
Benchmark Abrasives 14" x 1/8" (5/32") x 20mm T1 High Speed Gas Saw Wheels are built for demanding portable metal cutting where maximum reach and cutting depth are required. The large 14" diameter gives contractors, fabricators, maintenance crews, and repair professionals the capacity to tackle larger pipe, tubing, structural steel, and fabricated assemblies that smaller gas saw wheels cannot reach as effectively.
Made with aluminum oxide abrasive grain, these flat Type 1 wheels are designed specifically for cutting steel, stainless steel, and other approved metals. Their substantial profile supports controlled edge cutting through demanding metalwork on high-speed gas saws.
The 20mm arbor is designed for compatible 14" gas-powered cut-off saws, including the STIHL® TS 420, when the proper guard, flanges, mounting configuration, and bonded-abrasive cutting setup are used. With a maximum wheel speed of 5,400 RPM, machine speed must be checked carefully before installation.
Quantity: 10 Cut-Off Wheels
| Specification |
Details |
| Diameter |
14" |
| Thickness |
1/8" (5/32") |
| Arbor |
20mm |
| Wheel Type |
Type 1 Flat Gas Saw Wheel |
| Abrasive Grain |
Aluminum Oxide |
| Maximum RPM |
5,400 |
| Operation |
Cutting Only |
| Material Focus |
Steel, Stainless Steel & Approved Metals |
| Quantity |
10 Wheels |
Product Features
- Large 14" diameter for maximum cutting reach and depth
-
1/8" (5/32") thickness for high-speed gas saw applications
-
Aluminum oxide abrasive grain for steel, stainless steel, and approved metals
- Flat Type 1 construction engineered strictly for edge cutting
-
20mm arbor for compatible gas saw mounting systems
- Rated up to 5,400 RPM
- Built for portable fabrication, field cutting, industrial maintenance, and repair
- Professional 10-wheel pack
Materials & Applications
Recommended Materials:
- Steel
- Stainless Steel
- Other approved metals
Best For:
- Large-diameter metal pipe
- Tubing
- Structural steel
- Steel sections
- Fabricated assemblies
- Equipment repair
- Industrial maintenance
- Field fabrication
- Heavy-duty portable metal cutting
Machine Compatibility
Designed for compatible 14" gas-powered cut-off saws that accept a 20mm arbor bonded abrasive wheel and are approved for Type 1 metal-cutting wheel operation.
Compatible examples include:
- STIHL® TS 420
-
Makita® EK7301, 14" configuration with the factory-approved 20mm mounting setup
The machine must be approved for the wheel's 14" diameter, 20mm arbor, and 5,400 RPM maximum, along with the required guard, flanges, and mounting configuration. Confirm wheel thickness and any minimum wheel-speed rating specified by the saw manufacturer, too.
Not for use on the current Husqvarna® K 770 II 14" configuration: it requires a wheel rated at least 5,500 RPM, above this wheel's 5,400 RPM maximum.
Cutting Performance
The 14" diameter provides the greatest cutting reach in the Benchmark Abrasives gas saw wheel lineup, making it especially useful for large pipe, structural sections, fabricated assemblies, and other substantial metalwork.
Its aluminum oxide abrasive construction is designed for steel, stainless steel, and other approved metals. Use the wheel on the edge only and allow the abrasive to perform the cut without twisting, side loading, or excessive force.
Safety Tips
- Use this wheel for cutting only. Never grind with the side of the wheel.
- Never exceed the wheel's 5,400 RPM maximum speed.
- Use only on machines specifically approved for 14" bonded abrasive cut-off wheels.
- Confirm the machine accepts a 20mm arbor.
- Always use the correct guard, flanges, and mounting hardware specified by the saw manufacturer.
- Do not substitute stationary chop-saw wheels for gas-saw wheels.
- Do not assume a gas saw's ability to cut concrete means this wheel is approved for concrete or masonry.
- Use dry. Do not apply water to this bonded abrasive wheel.
- Inspect the wheel before use and do not operate cracked, chipped, damaged, or improperly stored wheels.
- Wear appropriate eye and face protection, hearing protection, gloves, respiratory protection where required, and other application-specific PPE.
