When the goal is maximum gloss with minimal cutting, reach for our flannel cushion sewn buffing wheel. Made in the USA from extremely soft flannel, this wheel is designed for final coloring and delicate polishing where preserving the surface is more important than material removal.
The cushion-sewn construction provides enough support for controlled polishing while remaining soft and conformable against the workpiece. Pair it with the appropriate fine finishing compound for a bright, highly reflective finish on soft metals, precious metals, plated surfaces, and other delicate materials.
Quantity: 1 Wheel
Dimensions
Specification
Details
Diameter
6"
Face Width
1/2"
Arbor
1"
Material
Flannel
Construction
Cushion Sewn
Recommended Operating Speed
2,500–2,700 RPM
Country of Origin
Made in USA
Arbor Adapters
Available separately to reduce the 1" arbor to 1/2", 5/8", or 3/4"
Product Features
Extremely soft flannel construction for delicate finishing
Designed primarily for final coloring and high-gloss polishing
Cushion sewing provides added support without making the wheel overly firm
Low-cutting action helps preserve fine finishes
Conforms well to contours and shaped surfaces
Reusable with proper care
Made in the USA
Machines Used On
Best suited for:
Bench buffers
Bench grinders configured for buffing
Polishing motors
Other compatible rotary polishing equipment
Always confirm that the machine spindle, arbor setup, adapters, and operating speed are appropriate for the wheel before use.
Applications
Ideal for final polishing and coloring of:
Aluminum
Brass
Copper
Gold
Silver
Chrome and nickel-plated surfaces
Other delicate surfaces where minimal material removal is desired
Flannel wheels may also be used for plastics and lacquered surfaces with an appropriate compound and careful heat control.
Polishing Performance
Cut
Very Low
Gloss
Very High
Stage
Final Polish / Coloring
Wheel Firmness
Very Soft
Best For
Maximum luster with minimal surface removal
Tip: This is a finishing wheel. If scratches, oxidation, sanding marks, or other imperfections still need to be removed, complete those steps with a firmer buffing wheel and cutting compound before switching to flannel.
For best results, dedicate one buffing wheel to each compound to prevent coarse compound residue from contaminating your final polishing step.
Safety Tips & Techniques
Apply a small amount of compound to the spinning wheel rather than overloading it.
Use light pressure and allow the wheel and compound to produce the finish.
Keep the workpiece moving to help control heat buildup.
Clean the workpiece before changing compounds or polishing stages.
Never exceed the operating limits of the wheel, machine, spindle, or mounting system.
Frequently Asked Questions
Flannel buffing wheels are primarily used for the final polishing or coloring stage. Their very soft construction produces high gloss while removing very little material.
Not as a first step. This wheel has very little cutting action. Remove scratches and sanding marks with the appropriate cutting compound and a firmer buffing wheel before moving to flannel for the final finish.
Yes. The wheel carries the polishing compound against the surface. Choose the compound based on the material and the polishing stage you are performing.
We recommend dedicating one wheel to one compound. Mixing compounds on the same wheel can transfer coarser abrasive particles into a finer polishing stage and reintroduce scratches.
Flannel is generally softer and less aggressive than cotton. Cotton wheels can be used through a wider range of cutting and coloring operations depending on their construction, while flannel is best reserved for delicate final polishing and maximum gloss.
Yes, flannel can be an excellent final-polishing material for compatible plastics when paired with a plastic-specific compound. Use light pressure, control operating speed, and minimize heat buildup because plastics can soften or distort when overheated.
This 6" wheel has a 1" arbor and is primarily intended for compatible bench buffers, polishing motors, bench grinders configured for buffing, and similar rotary equipment. Arbor adapters are available separately for certain smaller spindle sizes.
When the goal is maximum gloss with minimal cutting, reach for our flannel cushion sewn buffing wheel. Made in the USA from extremely soft flannel, this wheel is designed for final coloring and delicate polishing where preserving the surface is more important than material removal.
The cushion-sewn construction provides enough support for controlled polishing while remaining soft and conformable against the workpiece. Pair it with the appropriate fine finishing compound for a bright, highly reflective finish on soft metals, precious metals, plated surfaces, and other delicate materials.
Quantity: 1 Wheel
Dimensions
Specification
Details
Diameter
6"
Face Width
1/2"
Arbor
1"
Material
Flannel
Construction
Cushion Sewn
Recommended Operating Speed
2,500–2,700 RPM
Country of Origin
Made in USA
Arbor Adapters
Available separately to reduce the 1" arbor to 1/2", 5/8", or 3/4"
Product Features
Extremely soft flannel construction for delicate finishing
Designed primarily for final coloring and high-gloss polishing
Cushion sewing provides added support without making the wheel overly firm
Low-cutting action helps preserve fine finishes
Conforms well to contours and shaped surfaces
Reusable with proper care
Made in the USA
Machines Used On
Best suited for:
Bench buffers
Bench grinders configured for buffing
Polishing motors
Other compatible rotary polishing equipment
Always confirm that the machine spindle, arbor setup, adapters, and operating speed are appropriate for the wheel before use.
Applications
Ideal for final polishing and coloring of:
Aluminum
Brass
Copper
Gold
Silver
Chrome and nickel-plated surfaces
Other delicate surfaces where minimal material removal is desired
Flannel wheels may also be used for plastics and lacquered surfaces with an appropriate compound and careful heat control.
Polishing Performance
Cut
Very Low
Gloss
Very High
Stage
Final Polish / Coloring
Wheel Firmness
Very Soft
Best For
Maximum luster with minimal surface removal
Tip: This is a finishing wheel. If scratches, oxidation, sanding marks, or other imperfections still need to be removed, complete those steps with a firmer buffing wheel and cutting compound before switching to flannel.
For best results, dedicate one buffing wheel to each compound to prevent coarse compound residue from contaminating your final polishing step.
Safety Tips & Techniques
Apply a small amount of compound to the spinning wheel rather than overloading it.
Use light pressure and allow the wheel and compound to produce the finish.
Keep the workpiece moving to help control heat buildup.
Clean the workpiece before changing compounds or polishing stages.
Never exceed the operating limits of the wheel, machine, spindle, or mounting system.
Frequently Asked Questions
Flannel buffing wheels are primarily used for the final polishing or coloring stage. Their very soft construction produces high gloss while removing very little material.
Not as a first step. This wheel has very little cutting action. Remove scratches and sanding marks with the appropriate cutting compound and a firmer buffing wheel before moving to flannel for the final finish.
Yes. The wheel carries the polishing compound against the surface. Choose the compound based on the material and the polishing stage you are performing.
We recommend dedicating one wheel to one compound. Mixing compounds on the same wheel can transfer coarser abrasive particles into a finer polishing stage and reintroduce scratches.
Flannel is generally softer and less aggressive than cotton. Cotton wheels can be used through a wider range of cutting and coloring operations depending on their construction, while flannel is best reserved for delicate final polishing and maximum gloss.
Yes, flannel can be an excellent final-polishing material for compatible plastics when paired with a plastic-specific compound. Use light pressure, control operating speed, and minimize heat buildup because plastics can soften or distort when overheated.
This 6" wheel has a 1" arbor and is primarily intended for compatible bench buffers, polishing motors, bench grinders configured for buffing, and similar rotary equipment. Arbor adapters are available separately for certain smaller spindle sizes.
SHIPPING
FREE LIGHTNING FAST SHIPPING!
You read that right, Free shipping on orders over $100 + Orders placed before 12 noon PST = SHIP SAME DAY!
Orders placed after noon will ship the following day.
Standard FREE shipping is UPS Ground or USPS priority depending on size and weight. Most customers receive
their order within 3-5 days from date of purchase. Faster shipping options available for additional charge.
Free shipping not available on international orders. Free shipping will only be available to orders being
delivered within the lower 48 states.
Refund
Not happy with your product? Welcome to hassle free returns. Just shoot us an email, call the toll free number
or click the chat button below. One of our helpful employees will get you set up with an RGA and return
shipping info.
