2" X 72" CERAMIC SANDING BELT COMBO KIT (60/120) - 40 BELTS
The Benchmark Abrasives 2" x 72"ceramic sanding belt combo kit is built for knife makers and metal fabricators who regularly use 60 and 120 grit during grinding and refinement. The kit includes 40 Made in USA ceramic belts—20 in 60 grit and 20 in 120 grit—giving you a practical bulk assortment for repeat bevel work, blending, scratch refinement, and surface preparation.
Ceramic abrasive grain is designed for demanding steel grinding, while this two-grit combination focuses on the middle and finer stages of the grinding process. Use 60 grit for coarse grinding and bevel shaping, then move to 120 grit for finer refinement and preparation for subsequent finishing steps. One tube of belt grease is also included.
Kit Includes
Grit
Quantity
Best For
60 Grit
20 Belts
Coarse grinding, bevel shaping, deburring, continued stock removal
120 Grit
20 Belts
Fine refinement, scratch reduction, blending, finish preparation
Belt Grease
1 Tube
Abrasive-use accessory where appropriate
Total: 40 Ceramic Sanding Belts + 1 Tube of Belt Grease
Belt Specifications
Specification
Details
Belt Size
2" x 72"
Abrasive Grain
Ceramic
Included Grits
60, 120
Backing
Y-Weight
Coat
Closed Coat
Joint
Butt Joint
Direction
Bi-Directional
Use
Wet or Dry*
Country of Origin
Made in USA
*Wet use also depends on whether the machine and application are approved for wet operation.
Product Features
40-belt ceramic assortment for repeat knife-making and fabrication work
Twenty 60-grit belts and twenty 120-grit belts
Ceramic abrasive grain for demanding steel grinding
Y-weight backing for support during grinding
Closed-coat construction for dense abrasive coverage
Butt-joint construction for smooth, bi-directional operation
Includes one tube of belt grease
Made in USA
Materials & Applications
Best For: Knife makers and metal fabricators who regularly use 60 and 120 grit for bevel grinding, refinement, and surface preparation.
Common applications include:
Bevel shaping
Bevel refinement
Steel grinding
Deburring
Edge cleanup
Scratch refinement
Surface preparation
Blending
Knife making
General metal fabrication
60 Grit vs. 120 Grit
60 Grit — Coarse
Use for continued stock removal, bevel shaping, deburring, and refining the deeper scratch pattern left by very coarse belts.
120 Grit — Fine
Use for finer surface refinement, blending, scratch reduction, and preparing the blade or workpiece for later finishing stages.
This kit is intended for users who already rely on these two grits. It is not a complete coarse-to-fine grinding progression and does not include 36, 40, or 80 grit.
Machine Compatibility
Designed for machines using a nominal 2" x 72" sanding belt, including dedicated knife grinders and fabrication belt grinders.
Nominal-size matches include:
Kalamazoo® 2FS72
Kalamazoo® 2FS72M
JET® J-4103
Grizzly® G1015
Burr King® 960-272
Beaumont Metal Works® KMG
Beaumont Metal Works® KMG-TX
AmeriBrade® Fastback
Pheer® PH454 x 8
Always confirm your machine's required belt dimensions, configuration, and operating-speed requirements before use.
Tips for Better Belt Performance
Use a coarser belt first when substantial stock removal or initial blade profiling is required.
Move to 60 grit for continued grinding and bevel shaping, then 120 grit for finer refinement.
Preserve the intended blade and bevel geometry as you progress between grits.
Allow the ceramic abrasive to do the cutting rather than relying on excessive pressure.
Keep the belt properly tracked and inspect it before use.
Use the included belt grease only where appropriate for the abrasive, machine, and application.
If using the belts wet, confirm the grinder and application are approved for wet operation.
Always follow the grinder manufacturer's guarding and PPE requirements.
Frequently Asked Questions
These belts are designed for grinders that use 2" x 72" sanding belts. Examples include Kalamazoo® 2FS72/2FS72M, JET® J-4103, Grizzly® G1015, Burr King® 960-272, Beaumont Metal Works® KMG/KMG-TX, AmeriBrade® Fastback, and Pheer® PH454 x 8. Other machines using this belt size may also be compatible. Confirm your exact model and setup before ordering, and follow the machine and belt speed requirements.
The kit includes 40 ceramic sanding belts: 20 in 60 grit and 20 in 120 grit.
One tube of belt grease is included.
It is best for knife makers and fabricators who already know they regularly use 60 and 120 grit and want a larger quantity of both.
No. This kit focuses only on 60 and 120 grit. For a broader progression that includes heavier stock-removal grits, the 24-belt Ceramic Starter Kit includes 36, 60, 80, and 120 grit.
60 grit is useful for coarse grinding, bevel shaping, deburring, and continued stock removal after the roughest grinding stages.
120 grit is used for finer refinement, blending, scratch reduction, and preparing the surface for later finishing steps.
No. It includes only 60 and 120 grit.
Yes. The ceramic belts are designed for wet or dry use, but wet grinding should only be performed when the machine and application are approved for it.
Yes. The belts are bi-directional, but follow your grinder's required running direction.
Yes. The sanding belts in this kit are Made in USA.
2" X 72" CERAMIC SANDING BELT COMBO KIT (60/120) - 40 BELTS
The Benchmark Abrasives 2" x 72"ceramic sanding belt combo kit is built for knife makers and metal fabricators who regularly use 60 and 120 grit during grinding and refinement. The kit includes 40 Made in USA ceramic belts—20 in 60 grit and 20 in 120 grit—giving you a practical bulk assortment for repeat bevel work, blending, scratch refinement, and surface preparation.
Ceramic abrasive grain is designed for demanding steel grinding, while this two-grit combination focuses on the middle and finer stages of the grinding process. Use 60 grit for coarse grinding and bevel shaping, then move to 120 grit for finer refinement and preparation for subsequent finishing steps. One tube of belt grease is also included.
Kit Includes
Grit
Quantity
Best For
60 Grit
20 Belts
Coarse grinding, bevel shaping, deburring, continued stock removal
120 Grit
20 Belts
Fine refinement, scratch reduction, blending, finish preparation
Belt Grease
1 Tube
Abrasive-use accessory where appropriate
Total: 40 Ceramic Sanding Belts + 1 Tube of Belt Grease
Belt Specifications
Specification
Details
Belt Size
2" x 72"
Abrasive Grain
Ceramic
Included Grits
60, 120
Backing
Y-Weight
Coat
Closed Coat
Joint
Butt Joint
Direction
Bi-Directional
Use
Wet or Dry*
Country of Origin
Made in USA
*Wet use also depends on whether the machine and application are approved for wet operation.
Product Features
40-belt ceramic assortment for repeat knife-making and fabrication work
Twenty 60-grit belts and twenty 120-grit belts
Ceramic abrasive grain for demanding steel grinding
Y-weight backing for support during grinding
Closed-coat construction for dense abrasive coverage
Butt-joint construction for smooth, bi-directional operation
Includes one tube of belt grease
Made in USA
Materials & Applications
Best For: Knife makers and metal fabricators who regularly use 60 and 120 grit for bevel grinding, refinement, and surface preparation.
Common applications include:
Bevel shaping
Bevel refinement
Steel grinding
Deburring
Edge cleanup
Scratch refinement
Surface preparation
Blending
Knife making
General metal fabrication
60 Grit vs. 120 Grit
60 Grit — Coarse
Use for continued stock removal, bevel shaping, deburring, and refining the deeper scratch pattern left by very coarse belts.
120 Grit — Fine
Use for finer surface refinement, blending, scratch reduction, and preparing the blade or workpiece for later finishing stages.
This kit is intended for users who already rely on these two grits. It is not a complete coarse-to-fine grinding progression and does not include 36, 40, or 80 grit.
Machine Compatibility
Designed for machines using a nominal 2" x 72" sanding belt, including dedicated knife grinders and fabrication belt grinders.
Nominal-size matches include:
Kalamazoo® 2FS72
Kalamazoo® 2FS72M
JET® J-4103
Grizzly® G1015
Burr King® 960-272
Beaumont Metal Works® KMG
Beaumont Metal Works® KMG-TX
AmeriBrade® Fastback
Pheer® PH454 x 8
Always confirm your machine's required belt dimensions, configuration, and operating-speed requirements before use.
Tips for Better Belt Performance
Use a coarser belt first when substantial stock removal or initial blade profiling is required.
Move to 60 grit for continued grinding and bevel shaping, then 120 grit for finer refinement.
Preserve the intended blade and bevel geometry as you progress between grits.
Allow the ceramic abrasive to do the cutting rather than relying on excessive pressure.
Keep the belt properly tracked and inspect it before use.
Use the included belt grease only where appropriate for the abrasive, machine, and application.
If using the belts wet, confirm the grinder and application are approved for wet operation.
Always follow the grinder manufacturer's guarding and PPE requirements.
Frequently Asked Questions
These belts are designed for grinders that use 2" x 72" sanding belts. Examples include Kalamazoo® 2FS72/2FS72M, JET® J-4103, Grizzly® G1015, Burr King® 960-272, Beaumont Metal Works® KMG/KMG-TX, AmeriBrade® Fastback, and Pheer® PH454 x 8. Other machines using this belt size may also be compatible. Confirm your exact model and setup before ordering, and follow the machine and belt speed requirements.
The kit includes 40 ceramic sanding belts: 20 in 60 grit and 20 in 120 grit.
One tube of belt grease is included.
It is best for knife makers and fabricators who already know they regularly use 60 and 120 grit and want a larger quantity of both.
No. This kit focuses only on 60 and 120 grit. For a broader progression that includes heavier stock-removal grits, the 24-belt Ceramic Starter Kit includes 36, 60, 80, and 120 grit.
60 grit is useful for coarse grinding, bevel shaping, deburring, and continued stock removal after the roughest grinding stages.
120 grit is used for finer refinement, blending, scratch reduction, and preparing the surface for later finishing steps.
No. It includes only 60 and 120 grit.
Yes. The ceramic belts are designed for wet or dry use, but wet grinding should only be performed when the machine and application are approved for it.
Yes. The belts are bi-directional, but follow your grinder's required running direction.
Yes. The sanding belts in this kit are Made in USA.
SHIPPING
FREE LIGHTNING FAST SHIPPING!
You read that right, Free shipping on orders over $100 + Orders placed before 12 noon PST = SHIP SAME DAY!
Orders placed after noon will ship the following day.
Standard FREE shipping is UPS Ground or USPS priority depending on size and weight. Most customers receive
their order within 3-5 days from date of purchase. Faster shipping options available for additional charge.
Free shipping not available on international orders. Free shipping will only be available to orders being
delivered within the lower 48 states.
Refund
Not happy with your product? Welcome to hassle free returns. Just shoot us an email, call the toll free number
or click the chat button below. One of our helpful employees will get you set up with an RGA and return
shipping info.
