1/2" X 1/2" SURFACE CONDITIONING SPIRAL BANDS, 10 PACK
Benchmark Abrasives 1/2" x 1/2" surface conditioning spiral bands are designed for blending, light deburring, cleaning, and surface refinement on metal. Their compact 1/2" diameter makes them especially useful inside openings, around contours, and in confined areas where larger surface conditioning products cannot reach effectively.
The flexible nonwoven abrasive construction conforms to the workpiece while providing a more controlled finishing action than a conventional coated abrasive spiral band. Available in Coarse, Medium, and Fine grades, these bands let you choose the level of aggressiveness needed for cleanup, blending, and progressively finer surface refinement.
Quantity: 10 Spiral Bands
Product Specifications
Specification
Details
Size
1/2" x 1/2"
Inner Diameter
1/2"
Axial Width
1/2"
Abrasive Type
Surface Conditioning
Construction
Flexible Nonwoven Abrasive
Available Grades
Coarse, Medium, Fine
Maximum RPM
30,000 RPM
Approx. Grit Ranges
Coarse: 60-80 / Medium: 100-150 / Fine: 320-400
Quantity
10 Bands
Matching Drum
1/2" x 1/2" Rubber Expanding Drum
Drum Included
No – Sold Separately
Product Features
Flexible nonwoven construction conforms to curved and contoured surfaces
Designed for blending, cleaning, light deburring, and surface refinement
Compact 1/2" diameter reaches openings, edges, contours, and confined areas
Coarse, Medium, and Fine grades provide different levels of finishing action
Helps refine surfaces without the aggressive stock-removal action of a conventional coated abrasive band
Replaceable bands mount over the matching rubber expanding drum
Use Coarse when more aggressive cleaning and blending are required, Medium for general-purpose surface conditioning, and Fine when the goal is lighter blending and finer surface refinement.
Safety Tips & Techniques
Make sure the band is fully seated and supported by the correctly sized expanding drum.
Inspect the band and drum before use and replace damaged or excessively worn components.
Do not allow the spiral band to extend beyond the supporting drum.
Use light, controlled pressure and allow the nonwoven material to conform to the work surface.
Follow the speed limits for the band, expanding drum, and power tool. Never exceed the rating of the lowest-rated component.
Wear appropriate eye, hearing, respiratory, and hand protection for the material and application.
Frequently Asked Questions
No. Each package contains 10 surface conditioning spiral bands. The matching 1/2" x 1/2" Rubber Expanding Drum is sold separately.
The maximum speed is 30,000 RPM when this 1/2" x 1/2" surface conditioning spiral band is mounted on the matching expanding drum. Always follow the lowest RPM rating shown on the band, drum, and power tool.
Coarse provides the most aggressive surface-conditioning action for heavier cleaning and blending. Medium is the general-purpose grade for blending and surface preparation. Fine provides a lighter action for finer blending and surface refinement.
No direct sandpaper-grit equivalence should be assumed. Surface conditioning products use nonwoven grades rather than conventional coated-abrasive grit designations, and their cutting action differs from sandpaper.
Aluminum oxide, zirconia, and ceramic spiral bands are coated abrasives intended for sanding and material removal. Surface conditioning spiral bands use a flexible nonwoven construction and are better suited to blending, cleaning, light deburring, and refining a surface without the same level of stock removal.
Yes. Stainless steel is included in the material range for these Surface Conditioning Spiral Bands.
Wet-use approval has not been established for this product. Use them for dry applications unless product-specific wet-use instructions are provided.
Mount the band on the matching 1/2" x 1/2" rubber expanding drum, which has a 1/4" shank for compatible die grinders and rotary drills. Make sure the tool accepts a 1/4" shank and stays within the 30,000 RPM maximum for the band-and-drum assembly.
Mount the band on the matching 1/2" x 1/2" rubber expanding drum, which has a 1/4" shank for compatible die grinders and rotary drills. Make sure the tool accepts a 1/4" shank and stays within the 30,000 RPM maximum for the band-and-drum assembly.
1/2" X 1/2" SURFACE CONDITIONING SPIRAL BANDS, 10 PACK
Benchmark Abrasives 1/2" x 1/2" surface conditioning spiral bands are designed for blending, light deburring, cleaning, and surface refinement on metal. Their compact 1/2" diameter makes them especially useful inside openings, around contours, and in confined areas where larger surface conditioning products cannot reach effectively.
The flexible nonwoven abrasive construction conforms to the workpiece while providing a more controlled finishing action than a conventional coated abrasive spiral band. Available in Coarse, Medium, and Fine grades, these bands let you choose the level of aggressiveness needed for cleanup, blending, and progressively finer surface refinement.
Quantity: 10 Spiral Bands
Product Specifications
Specification
Details
Size
1/2" x 1/2"
Inner Diameter
1/2"
Axial Width
1/2"
Abrasive Type
Surface Conditioning
Construction
Flexible Nonwoven Abrasive
Available Grades
Coarse, Medium, Fine
Maximum RPM
30,000 RPM
Approx. Grit Ranges
Coarse: 60-80 / Medium: 100-150 / Fine: 320-400
Quantity
10 Bands
Matching Drum
1/2" x 1/2" Rubber Expanding Drum
Drum Included
No – Sold Separately
Product Features
Flexible nonwoven construction conforms to curved and contoured surfaces
Designed for blending, cleaning, light deburring, and surface refinement
Compact 1/2" diameter reaches openings, edges, contours, and confined areas
Coarse, Medium, and Fine grades provide different levels of finishing action
Helps refine surfaces without the aggressive stock-removal action of a conventional coated abrasive band
Replaceable bands mount over the matching rubber expanding drum
Use Coarse when more aggressive cleaning and blending are required, Medium for general-purpose surface conditioning, and Fine when the goal is lighter blending and finer surface refinement.
Safety Tips & Techniques
Make sure the band is fully seated and supported by the correctly sized expanding drum.
Inspect the band and drum before use and replace damaged or excessively worn components.
Do not allow the spiral band to extend beyond the supporting drum.
Use light, controlled pressure and allow the nonwoven material to conform to the work surface.
Follow the speed limits for the band, expanding drum, and power tool. Never exceed the rating of the lowest-rated component.
Wear appropriate eye, hearing, respiratory, and hand protection for the material and application.
Frequently Asked Questions
No. Each package contains 10 surface conditioning spiral bands. The matching 1/2" x 1/2" Rubber Expanding Drum is sold separately.
The maximum speed is 30,000 RPM when this 1/2" x 1/2" surface conditioning spiral band is mounted on the matching expanding drum. Always follow the lowest RPM rating shown on the band, drum, and power tool.
Coarse provides the most aggressive surface-conditioning action for heavier cleaning and blending. Medium is the general-purpose grade for blending and surface preparation. Fine provides a lighter action for finer blending and surface refinement.
No direct sandpaper-grit equivalence should be assumed. Surface conditioning products use nonwoven grades rather than conventional coated-abrasive grit designations, and their cutting action differs from sandpaper.
Aluminum oxide, zirconia, and ceramic spiral bands are coated abrasives intended for sanding and material removal. Surface conditioning spiral bands use a flexible nonwoven construction and are better suited to blending, cleaning, light deburring, and refining a surface without the same level of stock removal.
Yes. Stainless steel is included in the material range for these Surface Conditioning Spiral Bands.
Wet-use approval has not been established for this product. Use them for dry applications unless product-specific wet-use instructions are provided.
Mount the band on the matching 1/2" x 1/2" rubber expanding drum, which has a 1/4" shank for compatible die grinders and rotary drills. Make sure the tool accepts a 1/4" shank and stays within the 30,000 RPM maximum for the band-and-drum assembly.
Mount the band on the matching 1/2" x 1/2" rubber expanding drum, which has a 1/4" shank for compatible die grinders and rotary drills. Make sure the tool accepts a 1/4" shank and stays within the 30,000 RPM maximum for the band-and-drum assembly.
SHIPPING
FREE LIGHTNING FAST SHIPPING!
You read that right, Free shipping on orders over $100 + Orders placed before 12 noon PST = SHIP SAME DAY!
Orders placed after noon will ship the following day.
Standard FREE shipping is UPS Ground or USPS priority depending on size and weight. Most customers receive
their order within 3-5 days from date of purchase. Faster shipping options available for additional charge.
Free shipping not available on international orders. Free shipping will only be available to orders being
delivered within the lower 48 states.
Refund
Not happy with your product? Welcome to hassle free returns. Just shoot us an email, call the toll free number
or click the chat button below. One of our helpful employees will get you set up with an RGA and return
shipping info.
