12" 100-TOOTH TCT SAW BLADE FOR ALUMINUM & NON-FERROUS METALS
The Benchmark Abrasives 12" 100-Tooth TCT saw blade is designed for clean, controlled cutting of aluminum and other non-ferrous metals on compatible low-RPM dry-cut saws. Its 100-tooth configuration provides a strong balance of cutting efficiency and smoother edge quality, making it a versatile choice for fabrication and shop work where finish matters.
Durable tungsten carbide-tipped teeth and TCG (Triple Chip Grind) geometry help produce consistent cuts through aluminum extrusion, sheet, bar stock and similar non-ferrous materials. The 0.118" kerf and 1" arbor are designed for compatible 12" saws operating at or below the blade's 2,000 RPM maximum speed.
Quantity: 1 Blade
Product Specifications
Specification
Details
Blade Diameter
12"
Tooth Count
100 Teeth
Blade Type
Tungsten Carbide Tipped (TCT)
Tooth Geometry
TCG − Triple Chip Grind
Arbor / Bore
1"
Kerf
0.118"
Maximum RPM
2,000 RPM
Primary Material
Aluminum & Non-Ferrous Metals
Compatible Tool Type
Low-RPM Dry-Cut Saws
Product Features
100-tooth configuration provides a balanced combination of cutting efficiency and smoother edge quality.
TCG tooth geometry is designed for controlled cutting of aluminum and other non-ferrous metals.
Tungsten carbide-tipped teeth provide a durable cutting edge for repeated use.
0.118" kerf provides a stable cutting path through aluminum extrusion, sheet, and stock.
2,000 RPM maximum speed identifies the operating limit for proper machine selection.
Materials & Applications
Best For
Aluminum
Aluminum extrusion
Aluminum sheet
Aluminum bar
Aluminum profiles
Aluminum die castings
Brass
Copper
Bronze
Other similar non-ferrous metals
The 100-tooth configuration is well suited for fabrication, installation and finish-conscious shop work where a cleaner edge is important without moving all the way to the highest tooth-count option.
Machine Compatibility
Designed for compatible 12" low-RPM dry-cut saws that accept a 1" arbor and operate within the blade's maximum speed rating.
Always verify your saw's blade diameter, arbor size and operating RPM before installation. The saw must be designed to accept a 12" blade with a 1" arbor and must not exceed the blade's 2,000 RPM maximum rating.
Choosing the Right Tooth Count
Within Benchmark's 12" aluminum blade lineup, the 100-tooth blade is the balanced choice, providing a smoother finished edge than the 80T while maintaining more cutting efficiency than the 120T.
Tips for Better Blade Performance
Secure the workpiece firmly before cutting.
Use a steady, controlled feed rate and allow the blade to do the cutting.
Keep aluminum chips clear of the cutting area.
Inspect the blade before use for damaged, missing, or excessively worn teeth.
Replace or professionally sharpen the blade when cutting performance noticeably declines.
Saw blade lubricant or cutting wax can help reduce aluminum buildup on the teeth during demanding applications.
Never exceed the blade's 2,000 RPM maximum operating speed.
Safety
Use only on saws designed to accept this blade diameter and arbor configuration.
Never install the blade on a machine that exceeds the blade's maximum RPM.
Keep all factory guards installed and properly functioning.
Inspect the blade before every use. Do not use a cracked, warped, or damaged blade.
Secure the workpiece before cutting and maintain control throughout the cut.
This blade is designed for aluminum and non-ferrous metal cutting. Use a Benchmark TCT blade specifically designed for steel/ferrous metals when cutting steel.
Frequently Asked Questions
This blade is designed for aluminum and other non-ferrous metals, including brass, copper, and bronze. It is well suited for aluminum extrusion, sheet, bar stock, profiles, and die castings.
Choose the 80-tooth blade when faster cutting and productivity are the priority. Choose the 100-tooth blade for the best balance of cutting efficiency and smoother edge quality. Choose the 120-tooth blade when the finest finished edge is the highest priority.
The 100T provides more teeth in the cut, which generally produces a smoother finished edge and makes it better suited to finish-conscious fabrication and installation work.
The 100T offers a strong balance between edge quality and cutting efficiency. The 120T is more finish-focused, while the 100T remains a versatile option for everyday aluminum cutting where both speed and finish matter.
TCG stands for Triple Chip Grind. This tooth geometry alternates cutting profiles to distribute the cutting action across the teeth, helping provide controlled cutting, good edge quality, and tooth durability in aluminum and other non-ferrous metals.
This blade is designed for compatible low-RPM dry-cut saws and has a maximum operating speed of 2,000 RPM. Never install it on a saw that operates above the maximum RPM marked on the blade.
Only if the saw operates at 2,000 RPM or lower and is designed to accept a 12" blade with a 1" arbor. Many conventional 12" miter saws operate above this speed, so machine RPM must be verified before installation.
No. This blade is designed for aluminum and other non-ferrous metals. Use a Benchmark Abrasives TCT blade specifically designed for steel/ferrous metal when cutting steel.
Lubricant is not required for every application, but saw blade lubricant or cutting wax can help reduce aluminum buildup on the teeth and maintain smooth cutting performance during demanding applications.
Slower cutting, increased cutting effort, or declining edge quality can indicate a dull blade. A structurally sound blade may be professionally sharpened. Replace any blade that is cracked, warped, or has damaged or missing teeth.
12" 100-TOOTH TCT SAW BLADE FOR ALUMINUM & NON-FERROUS METALS
The Benchmark Abrasives 12" 100-Tooth TCT saw blade is designed for clean, controlled cutting of aluminum and other non-ferrous metals on compatible low-RPM dry-cut saws. Its 100-tooth configuration provides a strong balance of cutting efficiency and smoother edge quality, making it a versatile choice for fabrication and shop work where finish matters.
Durable tungsten carbide-tipped teeth and TCG (Triple Chip Grind) geometry help produce consistent cuts through aluminum extrusion, sheet, bar stock and similar non-ferrous materials. The 0.118" kerf and 1" arbor are designed for compatible 12" saws operating at or below the blade's 2,000 RPM maximum speed.
Quantity: 1 Blade
Product Specifications
Specification
Details
Blade Diameter
12"
Tooth Count
100 Teeth
Blade Type
Tungsten Carbide Tipped (TCT)
Tooth Geometry
TCG − Triple Chip Grind
Arbor / Bore
1"
Kerf
0.118"
Maximum RPM
2,000 RPM
Primary Material
Aluminum & Non-Ferrous Metals
Compatible Tool Type
Low-RPM Dry-Cut Saws
Product Features
100-tooth configuration provides a balanced combination of cutting efficiency and smoother edge quality.
TCG tooth geometry is designed for controlled cutting of aluminum and other non-ferrous metals.
Tungsten carbide-tipped teeth provide a durable cutting edge for repeated use.
0.118" kerf provides a stable cutting path through aluminum extrusion, sheet, and stock.
2,000 RPM maximum speed identifies the operating limit for proper machine selection.
Materials & Applications
Best For
Aluminum
Aluminum extrusion
Aluminum sheet
Aluminum bar
Aluminum profiles
Aluminum die castings
Brass
Copper
Bronze
Other similar non-ferrous metals
The 100-tooth configuration is well suited for fabrication, installation and finish-conscious shop work where a cleaner edge is important without moving all the way to the highest tooth-count option.
Machine Compatibility
Designed for compatible 12" low-RPM dry-cut saws that accept a 1" arbor and operate within the blade's maximum speed rating.
Always verify your saw's blade diameter, arbor size and operating RPM before installation. The saw must be designed to accept a 12" blade with a 1" arbor and must not exceed the blade's 2,000 RPM maximum rating.
Choosing the Right Tooth Count
Within Benchmark's 12" aluminum blade lineup, the 100-tooth blade is the balanced choice, providing a smoother finished edge than the 80T while maintaining more cutting efficiency than the 120T.
Tips for Better Blade Performance
Secure the workpiece firmly before cutting.
Use a steady, controlled feed rate and allow the blade to do the cutting.
Keep aluminum chips clear of the cutting area.
Inspect the blade before use for damaged, missing, or excessively worn teeth.
Replace or professionally sharpen the blade when cutting performance noticeably declines.
Saw blade lubricant or cutting wax can help reduce aluminum buildup on the teeth during demanding applications.
Never exceed the blade's 2,000 RPM maximum operating speed.
Safety
Use only on saws designed to accept this blade diameter and arbor configuration.
Never install the blade on a machine that exceeds the blade's maximum RPM.
Keep all factory guards installed and properly functioning.
Inspect the blade before every use. Do not use a cracked, warped, or damaged blade.
Secure the workpiece before cutting and maintain control throughout the cut.
This blade is designed for aluminum and non-ferrous metal cutting. Use a Benchmark TCT blade specifically designed for steel/ferrous metals when cutting steel.
Frequently Asked Questions
This blade is designed for aluminum and other non-ferrous metals, including brass, copper, and bronze. It is well suited for aluminum extrusion, sheet, bar stock, profiles, and die castings.
Choose the 80-tooth blade when faster cutting and productivity are the priority. Choose the 100-tooth blade for the best balance of cutting efficiency and smoother edge quality. Choose the 120-tooth blade when the finest finished edge is the highest priority.
The 100T provides more teeth in the cut, which generally produces a smoother finished edge and makes it better suited to finish-conscious fabrication and installation work.
The 100T offers a strong balance between edge quality and cutting efficiency. The 120T is more finish-focused, while the 100T remains a versatile option for everyday aluminum cutting where both speed and finish matter.
TCG stands for Triple Chip Grind. This tooth geometry alternates cutting profiles to distribute the cutting action across the teeth, helping provide controlled cutting, good edge quality, and tooth durability in aluminum and other non-ferrous metals.
This blade is designed for compatible low-RPM dry-cut saws and has a maximum operating speed of 2,000 RPM. Never install it on a saw that operates above the maximum RPM marked on the blade.
Only if the saw operates at 2,000 RPM or lower and is designed to accept a 12" blade with a 1" arbor. Many conventional 12" miter saws operate above this speed, so machine RPM must be verified before installation.
No. This blade is designed for aluminum and other non-ferrous metals. Use a Benchmark Abrasives TCT blade specifically designed for steel/ferrous metal when cutting steel.
Lubricant is not required for every application, but saw blade lubricant or cutting wax can help reduce aluminum buildup on the teeth and maintain smooth cutting performance during demanding applications.
Slower cutting, increased cutting effort, or declining edge quality can indicate a dull blade. A structurally sound blade may be professionally sharpened. Replace any blade that is cracked, warped, or has damaged or missing teeth.
SHIPPING
FREE LIGHTNING FAST SHIPPING!
You read that right, Free shipping on orders over $100 + Orders placed before 12 noon PST = SHIP SAME DAY!
Orders placed after noon will ship the following day.
Standard FREE shipping is UPS Ground or USPS priority depending on size and weight. Most customers receive
their order within 3-5 days from date of purchase. Faster shipping options available for additional charge.
Free shipping not available on international orders. Free shipping will only be available to orders being
delivered within the lower 48 states.
Refund
Not happy with your product? Welcome to hassle free returns. Just shoot us an email, call the toll free number
or click the chat button below. One of our helpful employees will get you set up with an RGA and return
shipping info.
