14" 100-TOOTH TCT SAW BLADE FOR ALUMINUM & NON-FERROUS METALS
The Benchmark Abrasives 14" 100-Tooth TCT saw blade is built for clean, controlled cutting of larger aluminum and non-ferrous workpieces on compatible low-RPM dry-cut saws. Its 100-tooth configuration and TCG (Triple Chip Grind) tooth geometry provide smooth cutting performance and clean edge quality for fabrication, production and shop applications.
Designed for larger-capacity cutting, this blade combines durable tungsten carbide-tipped teeth with a 0.138" kerf for consistent performance through aluminum extrusion, bar stock, sheet, profiles and similar non-ferrous materials. The 1" arbor is designed for compatible 14" dry-cut saws operating at or below the blade's 1,800 RPM maximum speed.
Quantity: 1 Blade
Product Specifications
Specification
Details
Blade Diameter
14"
Tooth Count
100 Teeth
Blade Type
Tungsten Carbide Tipped (TCT)
Tooth Geometry
TCG − Triple Chip Grind
Arbor / Bore
1"
Kerf
0.138"
Maximum RPM
1,800 RPM
Primary Material
Aluminum & Non-Ferrous Metals
Compatible Tool Type
Low-RPM Dry-Cut Saws
Product Features
14" blade diameter provides greater cutting capacity for larger aluminum stock and profiles.
100-tooth configuration provides controlled cutting with a clean finished edge.
TCG tooth geometry is designed for aluminum and other non-ferrous metals.
Tungsten carbide-tipped teeth provide a durable cutting edge for repeated use.
0.138" kerf provides a stable cutting path through larger aluminum workpieces.
1,800 RPM maximum speed identifies the operating limit for proper machine selection.
Materials & Applications
Best For
Aluminum
Aluminum extrusion
Aluminum sheet
Aluminum bar
Aluminum profiles
Aluminum die castings
Brass
Copper
Bronze
Other similar non-ferrous metals
The larger 14" diameter makes this blade particularly useful for fabrication and production environments cutting larger aluminum profiles, extrusion and stock where both cutting capacity and clean edge quality are important.
Machine Compatibility
Designed for compatible 14" low-RPM dry-cut saws that accept a 1" arbor and operate within the blade's maximum speed rating.
Always verify your saw's blade diameter, arbor size and operating RPM before installation. The saw must be designed to accept a 14" blade with a 1" arbor and must not exceed the blade's 1,800 RPM maximum rating.
Choosing the Right Tooth Count
With 100 teeth on a 14" blade, this blade is designed to provide controlled cutting and clean edge quality for larger aluminum and non-ferrous applications.
Tips for Better Blade Performance
Secure the workpiece firmly before cutting.
Use a steady, controlled feed rate and allow the blade to do the cutting.
Keep aluminum chips clear of the cutting area.
Inspect the blade before use for damaged, missing, or excessively worn teeth.
Replace or professionally sharpen the blade when cutting performance noticeably declines.
Saw blade lubricant or cutting wax can help reduce aluminum buildup on the teeth during demanding applications.
Never exceed the blade's 1,800 RPM maximum operating speed.
Safety
Use only on saws designed to accept this blade diameter and arbor configuration.
Never install the blade on a machine that exceeds the blade's maximum RPM.
Keep all factory guards installed and properly functioning.
Inspect the blade before every use. Do not use a cracked, warped, or damaged blade.
Secure the workpiece before cutting and maintain control throughout the cut.
This blade is designed for aluminum and non-ferrous metal cutting. Use a Benchmark TCT blade specifically designed for steel/ferrous metals when cutting steel.
Frequently Asked Questions
This blade is designed for aluminum and other non-ferrous metals, including brass, copper, and bronze. It is well suited for aluminum extrusion, sheet, bar stock, profiles, and die castings.
The larger blade diameter provides greater cutting capacity for larger aluminum extrusion, profiles, and stock. It is a practical choice for fabrication and production environments using compatible 14" low-RPM dry-cut saws.
Yes. The 100-tooth configuration and TCG tooth geometry are designed to provide controlled cutting and clean edge quality in aluminum and other non-ferrous metals.
TCG stands for Triple Chip Grind. This tooth geometry alternates cutting profiles to distribute the cutting action across the teeth, helping provide controlled cutting, good edge quality, and tooth durability in aluminum and other non-ferrous metals.
This 14" blade is designed for compatible low-RPM dry-cut saws and has a maximum operating speed of 1,800 RPM. Never install it on a saw that operates above the maximum RPM marked on the blade.
Only if the saw is designed to accept a 14" blade with a 1" arbor and operates at 1,800 RPM or lower. Machine RPM must be verified before installing the blade.
No. This blade is designed for aluminum and other non-ferrous metals. Use a Benchmark Abrasives TCT blade specifically designed for steel/ferrous metal when cutting steel.
The blade has a 0.138" kerf, which is the approximate width of material removed by the blade during the cut.
Lubricant is not required for every application, but saw blade lubricant or cutting wax can help reduce aluminum buildup on the teeth and maintain smooth cutting performance during demanding applications.
Slower cutting, increased cutting effort, or declining edge quality can indicate a dull blade. A structurally sound blade may be professionally sharpened. Replace any blade that is cracked, warped, or has damaged or missing teeth.
14" 100-TOOTH TCT SAW BLADE FOR ALUMINUM & NON-FERROUS METALS
The Benchmark Abrasives 14" 100-Tooth TCT saw blade is built for clean, controlled cutting of larger aluminum and non-ferrous workpieces on compatible low-RPM dry-cut saws. Its 100-tooth configuration and TCG (Triple Chip Grind) tooth geometry provide smooth cutting performance and clean edge quality for fabrication, production and shop applications.
Designed for larger-capacity cutting, this blade combines durable tungsten carbide-tipped teeth with a 0.138" kerf for consistent performance through aluminum extrusion, bar stock, sheet, profiles and similar non-ferrous materials. The 1" arbor is designed for compatible 14" dry-cut saws operating at or below the blade's 1,800 RPM maximum speed.
Quantity: 1 Blade
Product Specifications
Specification
Details
Blade Diameter
14"
Tooth Count
100 Teeth
Blade Type
Tungsten Carbide Tipped (TCT)
Tooth Geometry
TCG − Triple Chip Grind
Arbor / Bore
1"
Kerf
0.138"
Maximum RPM
1,800 RPM
Primary Material
Aluminum & Non-Ferrous Metals
Compatible Tool Type
Low-RPM Dry-Cut Saws
Product Features
14" blade diameter provides greater cutting capacity for larger aluminum stock and profiles.
100-tooth configuration provides controlled cutting with a clean finished edge.
TCG tooth geometry is designed for aluminum and other non-ferrous metals.
Tungsten carbide-tipped teeth provide a durable cutting edge for repeated use.
0.138" kerf provides a stable cutting path through larger aluminum workpieces.
1,800 RPM maximum speed identifies the operating limit for proper machine selection.
Materials & Applications
Best For
Aluminum
Aluminum extrusion
Aluminum sheet
Aluminum bar
Aluminum profiles
Aluminum die castings
Brass
Copper
Bronze
Other similar non-ferrous metals
The larger 14" diameter makes this blade particularly useful for fabrication and production environments cutting larger aluminum profiles, extrusion and stock where both cutting capacity and clean edge quality are important.
Machine Compatibility
Designed for compatible 14" low-RPM dry-cut saws that accept a 1" arbor and operate within the blade's maximum speed rating.
Always verify your saw's blade diameter, arbor size and operating RPM before installation. The saw must be designed to accept a 14" blade with a 1" arbor and must not exceed the blade's 1,800 RPM maximum rating.
Choosing the Right Tooth Count
With 100 teeth on a 14" blade, this blade is designed to provide controlled cutting and clean edge quality for larger aluminum and non-ferrous applications.
Tips for Better Blade Performance
Secure the workpiece firmly before cutting.
Use a steady, controlled feed rate and allow the blade to do the cutting.
Keep aluminum chips clear of the cutting area.
Inspect the blade before use for damaged, missing, or excessively worn teeth.
Replace or professionally sharpen the blade when cutting performance noticeably declines.
Saw blade lubricant or cutting wax can help reduce aluminum buildup on the teeth during demanding applications.
Never exceed the blade's 1,800 RPM maximum operating speed.
Safety
Use only on saws designed to accept this blade diameter and arbor configuration.
Never install the blade on a machine that exceeds the blade's maximum RPM.
Keep all factory guards installed and properly functioning.
Inspect the blade before every use. Do not use a cracked, warped, or damaged blade.
Secure the workpiece before cutting and maintain control throughout the cut.
This blade is designed for aluminum and non-ferrous metal cutting. Use a Benchmark TCT blade specifically designed for steel/ferrous metals when cutting steel.
Frequently Asked Questions
This blade is designed for aluminum and other non-ferrous metals, including brass, copper, and bronze. It is well suited for aluminum extrusion, sheet, bar stock, profiles, and die castings.
The larger blade diameter provides greater cutting capacity for larger aluminum extrusion, profiles, and stock. It is a practical choice for fabrication and production environments using compatible 14" low-RPM dry-cut saws.
Yes. The 100-tooth configuration and TCG tooth geometry are designed to provide controlled cutting and clean edge quality in aluminum and other non-ferrous metals.
TCG stands for Triple Chip Grind. This tooth geometry alternates cutting profiles to distribute the cutting action across the teeth, helping provide controlled cutting, good edge quality, and tooth durability in aluminum and other non-ferrous metals.
This 14" blade is designed for compatible low-RPM dry-cut saws and has a maximum operating speed of 1,800 RPM. Never install it on a saw that operates above the maximum RPM marked on the blade.
Only if the saw is designed to accept a 14" blade with a 1" arbor and operates at 1,800 RPM or lower. Machine RPM must be verified before installing the blade.
No. This blade is designed for aluminum and other non-ferrous metals. Use a Benchmark Abrasives TCT blade specifically designed for steel/ferrous metal when cutting steel.
The blade has a 0.138" kerf, which is the approximate width of material removed by the blade during the cut.
Lubricant is not required for every application, but saw blade lubricant or cutting wax can help reduce aluminum buildup on the teeth and maintain smooth cutting performance during demanding applications.
Slower cutting, increased cutting effort, or declining edge quality can indicate a dull blade. A structurally sound blade may be professionally sharpened. Replace any blade that is cracked, warped, or has damaged or missing teeth.
SHIPPING
FREE LIGHTNING FAST SHIPPING!
You read that right, Free shipping on orders over $100 + Orders placed before 12 noon PST = SHIP SAME DAY!
Orders placed after noon will ship the following day.
Standard FREE shipping is UPS Ground or USPS priority depending on size and weight. Most customers receive
their order within 3-5 days from date of purchase. Faster shipping options available for additional charge.
Free shipping not available on international orders. Free shipping will only be available to orders being
delivered within the lower 48 states.
Refund
Not happy with your product? Welcome to hassle free returns. Just shoot us an email, call the toll free number
or click the chat button below. One of our helpful employees will get you set up with an RGA and return
shipping info.
