Product Specification
4-1/2” HOT PRESSED SEGMENTED TURBO MG TEETH DIAMOND BLADE
Built for aggressive, controlled cutting across demanding masonry and stone, the Benchmark Abrasives 4-1/2” Hot Pressed Segmented Turbo MG Teeth Diamond Blade is designed for granite, marble, concrete, reinforced concrete, engineering brick, hard clay roof tile, and masonry. Its segmented turbo MG teeth profile is designed to combine productive material removal with the cutting control needed for construction, remodeling, fabrication, and repair work.
The compact 4-1/2” diameter provides excellent maneuverability for handheld cutting, while the 7 mm diamond rim supports versatile cutting across both masonry and natural stone. Designed for dry cutting with a 7/8" / 5/8" arbor configuration and rated up to 13,580 RPM, this blade is built for users who need a versatile diamond blade for tough general-purpose applications.
Product Specifications
| Specification |
Details |
| Diameter |
4-1/2" |
| Blade Type |
Hot Pressed Segmented Turbo MG Teeth Diamond Blade |
| Diamond Rim Height |
7 mm |
| Arbor |
7/8" / 5/8" |
| Maximum RPM |
13,580 RPM |
| Cutting Method |
Dry Only |
| Quantity |
1 Blade |
Features
- Hot-pressed segmented turbo MG teeth diamond blade
- Designed for demanding general-purpose masonry and stone cutting
- Segmented turbo profile supports productive material removal
- 7 mm diamond rim
- Designed for concrete and reinforced concrete applications
- Suitable for granite, marble, engineering brick, hard clay roof tile, and masonry
- Compact 4-1/2" diameter provides excellent handheld control
- 7/8" / 5/8" arbor configuration
- Designed specifically for dry cutting
- Rated up to 13,580 RPM
Applications & Performance
Designed for demanding dry-cutting applications across masonry, concrete, and natural stone.
- Concrete cutting
- Reinforced concrete cutting
- Granite cutting
- Marble cutting
- Engineering brick cutting
- Hard clay roof tile cutting
- General masonry cutting
- Construction and renovation
- Stone installation and fabrication
- Trimming and detail work
- Repair applications
The segmented turbo MG teeth profile makes this blade a versatile option for users who need aggressive cutting performance across a broad range of hard construction and stone materials.
Materials
- Granite
- Marble
- Concrete
- Reinforced Concrete
- Engineering Brick
- Hard Clay Roof Tile
- Masonry
Machine Compatibility
For use with 4-1/2” angle grinders.
Compatible examples include:
-
Benchmark Abrasives 4-1/2" Corded Angle Grinder (BMT-AGBC4570_1) — 11,000 RPM; dry cutting with 7/8" mounting and the appropriate diamond cutting guard.
Other models may also fit. Match the mounting, speed rating and required guard to your tool.
Safety Tips
- Never exceed the blade’s maximum rated speed of 13,580 RPM.
- This blade is intended for dry cutting only.
- Inspect the blade, diamond rim, arbor opening, and mounting flanges before each use.
- Do not use a damaged, cracked, bent, or distorted blade.
- Match the 7/8" / 5/8" arbor configuration to the machine’s approved mounting arrangement.
- Never enlarge the arbor opening or use improvised or loose reducing bushings.
- Use the cutting guard and flange system specified by the machine manufacturer.
- Allow the blade to cut at its own rate rather than forcing it through the material.
- Follow required cooling intervals during dry cutting.
- Do not side-load or grind with the sides of the blade unless the exact accessory is specifically approved for that operation.
- Use appropriate eye, hearing, respiratory, and other required personal protective equipment.
- Dry cutting concrete, brick, granite, marble, and other silica-containing materials can generate respirable silica dust. Use task-appropriate dust-extraction controls.
