Product Specification
4” X 5/8”-11 THREADED T-TYPE DIAMOND GRINDING CUP WHEEL
Built for aggressive surface grinding, leveling, and stock removal, the Benchmark Abrasives 4” T-Type Diamond Grinding Cup Wheel is designed for concrete, granite, marble, masonry, and natural stone. Its T-Type diamond segment layout is intended for productive material removal when correcting uneven surfaces, removing high spots, and preparing hard mineral surfaces for coating, finishing, or additional surface work.
The compact 4” diameter gives operators excellent control for localized grinding and edge work, while the 7 mm diamond segments provide a tall diamond-bearing wear section. A direct-thread 5/8"-11 UNC hub mounts to compatible grinding equipment, and the wheel is rated up to 13,580 RPM for demanding concrete preparation, renovation, restoration, and stone-grinding applications.
Product Specifications
| Specification |
Details |
| Diameter |
4" |
| Wheel Type |
T-Type Diamond Grinding Cup Wheel |
| Operation |
Surface Grinding |
| Diamond Segment Height |
7 mm |
| Arbor |
5/8"-11 UNC Threaded |
| Maximum RPM |
13,580 RPM |
| Quantity |
1 Wheel |
Features
- T-Type diamond segment design for surface grinding and leveling
- Designed for stock removal on hard mineral surfaces
- 7 mm diamond segment height
- Compact 4" diameter for controlled grinding in smaller areas
- Direct-thread 5/8"-11 UNC mounting
- Rated up to 13,580 RPM
- Suitable for concrete, granite, marble, masonry, and natural stone
- Useful for removing high spots and correcting uneven surfaces
- Designed specifically for surface grinding rather than cutting
- Well suited for concrete preparation, construction, renovation, and stone work
Applications & Performance
Designed for grinding, leveling, and surface preparation on hard masonry and stone surfaces.
- Concrete surface leveling
- Removing high spots
- Smoothing uneven concrete
- Masonry surface preparation
- Granite grinding
- Marble grinding
- Natural stone surface preparation
- Edge and localized grinding
- Surface correction before coatings or finishing
- Construction and renovation work
The T-Type segment arrangement is designed for general-purpose stock removal and leveling across concrete, masonry, and stone surfaces.
Materials
- Concrete
- Granite
- Marble
- Masonry
- Natural Stone
Machine Compatibility
For use with 4” angle grinders.
Compatible examples include:
-
Milwaukee® 6117-33D Angle Grinder — 11,000 RPM maximum; 5/8"-11 threaded mounting with the manufacturer’s 4"/5" surface-grinding dust shroud. For dry grinding when permitted by the wheel marking.
Other models may also fit. Match the mounting, speed rating and required guard to your tool.
Safety Tips
- Never exceed the wheel’s maximum rated speed of 13,580 RPM.
- Inspect the diamond segments, steel body, and threaded hub before each use.
- Do not use a cracked, damaged, bent, or excessively worn cup wheel.
- Confirm the grinder uses the correct 5/8"-11 threaded spindle.
- Thread the cup wheel fully and securely onto the spindle according to the machine manufacturer’s instructions.
- Use a guard or dust shroud designed for diamond cup-wheel grinding.
- Maintain controlled contact with the work surface and avoid excessive pressure.
- Do not use this cup wheel as a cut-off blade.
- Use only the grinding method marked on the wheel and approved for the machine. Never add water to a dry-use grinder.
- Use appropriate eye, hearing, respiratory, hand, and other required personal protective equipment.
- Grinding concrete, masonry, granite, marble, and other silica-containing materials can generate respirable silica dust. Use appropriate water-delivery or dust-extraction controls.
