Product Specification
5” HOT PRESSED SINTERED TURBO DIAMOND BLADE
Built for fast, controlled cutting across hard masonry and stone, the Benchmark Abrasives 5” Hot Pressed Sintered Turbo Diamond Blade is designed for granite, marble, concrete, reinforced concrete, engineering brick, hard clay roof tile, and masonry. Its turbo-style diamond rim maintains more consistent contact with the material than an open segmented blade, helping balance aggressive material removal with improved control over the finished edge.
The 5” diameter provides additional cutting capacity over smaller handheld blades while the 7 mm diamond rim supports versatile general-purpose cutting. Designed specifically for dry cutting with a 7/8" / 5/8" arbor configuration, this blade is well suited for construction, remodeling, stone work, repair, and installation applications where both cutting speed and control matter.
Product Specifications
| Specification |
Details |
| Diameter |
5" |
| Blade Type |
Hot Pressed Sintered Turbo Diamond Blade |
| Diamond Rim Height |
7 mm |
| Arbor |
7/8" / 5/8" |
| Cutting Method |
Dry Only |
| Quantity |
1 Blade |
Features
- Hot-pressed sintered turbo diamond blade for demanding general-purpose cutting
- Turbo rim balances aggressive cutting speed with improved edge control
- 7 mm diamond rim
- Designed for masonry, concrete, reinforced concrete, and natural stone
- Suitable for granite, marble, engineering brick, and hard clay roof tile
- 5" diameter provides additional cutting capacity and reach
- 7/8" / 5/8" arbor configuration
- Designed specifically for dry cutting
- Well suited for construction, remodeling, stone work, and repair applications
- Purpose-built for cutting rather than side grinding
Applications & Performance
Designed for demanding dry-cutting applications where users need a combination of cutting speed, capacity, and material versatility.
- Concrete cutting
- Reinforced concrete cutting
- Granite cutting
- Marble cutting
- Engineering brick cutting
- Hard clay roof tile cutting
- General masonry cutting
- Construction and renovation
- Stone installation and fabrication
- Trimming and general-purpose cuts
- Repair applications
The turbo rim maintains more consistent contact with the workpiece than an open segmented rim, helping provide smoother cutting action while still supporting productive material removal.
Materials
- Granite
- Marble
- Concrete
- Reinforced Concrete
- Engineering Brick
- Hard Clay Roof Tile
- Masonry
Machine Compatibility
For use with 5” angle grinders.
Compatible examples include:
-
Makita® 9565CV 5" Angle Grinder — 10,500 RPM maximum; dry cutting with 7/8" mounting and the 122911-0 cutting guard. The blade must be rated for at least 10,500 RPM.
Other models may also fit. Match the mounting, speed rating and required guard to your tool.
Safety Tips
- Verify the blade’s marked maximum RPM before use and never operate it above that rating.
- This blade is intended for dry cutting only.
- Inspect the blade, turbo rim, arbor opening, and mounting flanges before each use.
- Do not use a damaged, cracked, bent, or distorted blade.
- Match the 7/8" / 5/8" arbor configuration to the machine’s approved mounting arrangement.
- Never enlarge the arbor opening or use improvised or loose reducing bushings.
- Use the cutting guard and flange system specified by the machine manufacturer.
- Allow the blade to cut at its own rate rather than forcing it through the material.
- Follow required cooling intervals during dry cutting.
- Do not side-load or grind with the sides of the blade unless the exact accessory is specifically approved for that operation.
- Use appropriate eye, hearing, respiratory, and other required personal protective equipment.
- Dry cutting concrete, brick, granite, marble, and other silica-containing materials can generate respirable silica dust. Use task-appropriate dust-extraction controls.
