7" Hot Pressed Segmented Turbo MG Teeth Diamond Blade

• Product Specification
• Shipping
• Refund

Product Specification

7” HOT PRESSED SEGMENTED TURBO MG TEETH DIAMOND BLADE

Built for aggressive cutting across demanding masonry and stone, the Benchmark Abrasives 7” Hot Pressed Segmented Turbo MG Teeth Diamond Blade is designed for granite, marble, concrete, reinforced concrete, engineering brick, hard clay roof tile, and masonry. Its segmented turbo MG teeth profile gives contractors and fabricators a versatile cutting option for tough construction, remodeling, stone, and repair applications.

The larger 7” diameter provides increased cutting reach for deeper cuts, while the 7 mm diamond rim supports productive material removal across both masonry and natural stone. Designed specifically for dry cutting with a 7/8" / 5/8" arbor configuration, this blade is built for applications where cutting capacity, material versatility, and controlled performance are all important.

Product Specifications

Features

• Hot-pressed segmented turbo MG teeth diamond blade
• Designed for demanding general-purpose masonry and stone cutting
• Segmented turbo cutting profile
• 7 mm diamond rim
• Designed for concrete and reinforced concrete applications
• Suitable for granite, marble, engineering brick, hard clay roof tile, and masonry
• 7" diameter provides increased cutting depth and reach
• 7/8" / 5/8" arbor configuration
• Designed specifically for dry cutting
• Well suited for construction, remodeling, fabrication, and repair work

Applications & Performance

Designed for demanding dry-cutting applications across masonry, concrete, and natural stone.

• Concrete cutting
• Reinforced concrete cutting
• Granite cutting
• Marble cutting
• Engineering brick cutting
• Hard clay roof tile cutting
• General masonry cutting
• Construction and renovation
• Stone installation and fabrication
• Deeper general-purpose cuts
• Repair applications

The segmented turbo MG teeth profile makes this blade a versatile choice when working across a broad range of hard construction and stone materials.

Materials

• Granite
• Marble
• Concrete
• Reinforced Concrete
• Engineering Brick
• Hard Clay Roof Tile
• Masonry

Machine Compatibility

For use with 7” angle grinders.

Compatible examples include:

• Makita® GA7021 7" Angle Grinder — 6,600 RPM; dry cutting with 7/8" mounting and the 122914-4 cut-off guard. The blade must be rated for at least 6,600 RPM.

Other models may also fit. Match the mounting, speed rating and required guard to your tool.

Safety Tips

• Verify the blade’s marked maximum RPM before use and never operate it above that rating.
• This blade is intended for dry cutting only.
• Inspect the blade, diamond rim, arbor opening, and mounting flanges before each use.
• Do not use a damaged, cracked, bent, or distorted blade.
• Match the 7/8" / 5/8" arbor configuration to the machine’s approved mounting arrangement.
• Never enlarge the arbor opening or use improvised or loose reducing bushings.
• Use the cutting guard and flange system specified by the machine manufacturer.
• Allow the blade to cut at its own rate rather than forcing it through the material.
• Follow required cooling intervals during dry cutting.
• Do not side-load or grind with the sides of the blade unless the exact accessory is specifically approved for that operation.
• Use appropriate eye, hearing, respiratory, and other required personal protective equipment.
• Dry cutting concrete, brick, granite, marble, and other silica-containing materials can generate respirable silica dust. Use task-appropriate dust-extraction controls.