The Benchmark Abrasives 1" x 30" aluminum oxide sanding belt is a Made in USA, general-purpose abrasive belt for sanding, shaping, and surface preparation on wood and metal. The compact 1" x 30" size is popular for benchtop sanders, smaller fabrication setups, detail work, and entry-level knife-making grinders.
Aluminum oxide provides a practical balance of cutting performance and value for everyday sanding. Available from aggressive 24 grit through fine 400 grit, this belt gives you options for material removal, shaping, blending, scratch refinement, and finer finishing without changing abrasive families.
*Wet use also depends on whether the machine and application are approved for wet operation.
Product Features
Aluminum oxide grain for general-purpose sanding on wood and metal
X-weight polycotton cloth backing for support during sanding
Closed-coat construction provides dense abrasive coverage
Butt-joint construction allows the belt to run in either direction
Wide 24–400 grit selection for coarse sanding through finer surface refinement
Made in USA
Materials & Applications
Best For: General-purpose wood and metal sanding on compact 1" x 30" belt sanders./p>
Common applications include:
Surface sanding and preparation
Shaping and contour work
Edge and detail sanding
Removing surface imperfections
Progressive scratch refinement
General fabrication and maintenance work
Smaller knife-making and hobby-shop sanding applications
Machine Compatibility
Designed for machines using a 1" x 30" sanding belt, including benchtop belt sanders, belt/disc combination machines, compact grinders, and smaller knife-making setups.
Fits machines designed for 1" x 30" sanding belts, including:
RIKON® 50-151 Belt/Disc Sander
RIKON® 50-161VS Variable-Speed Belt/Disc Sander
Grizzly® H6070 Belt/Disc Sander
WEN® 6515T Belt/Disc Sander
Harbor Freight® 58359 Belt Sander
Always confirm your machine's required belt dimensions, configuration, and operating-speed requirements before use.
Tips for Better Belt Performance
Use these aluminum oxide belts for dry sanding only.
Allow the abrasive to do the cutting rather than applying excessive pressure.
Keep the belt tracking correctly and inspect it before use.
A sanding belt cleaning stick can help remove accumulated material from the abrasive surface when appropriate.
Always use the guards and PPE required for your machine and application.
Frequently Asked Questions
No. Benchmark recommends these aluminum oxide sanding belts for dry use only.
This belt is designed for machines that use 1" x 30" sanding belts. Examples include RIKON® 50-151 and 50-161VS, Grizzly® H6070, WEN® 6515T, and Harbor Freight® item 58359. Other machines using this belt size may also be compatible. Check your exact model and installed setup before ordering, and follow the machine and belt speed requirements. For metal grinding, use a machine approved for metalwork.
Yes. The compact belt size works well for smaller knife-making setups, shaping, detail sanding, and general shop work. For higher-production knife grinding and larger contact-wheel or platen setups, 2" x 72" grinders are the more common dedicated format.
Use 24–36 grit for very aggressive removal, 40–60 grit for coarse sanding and shaping, 80–100 grit for general smoothing, 120–220 grit for fine sanding and refinement, and 240–400 grit for very fine finishing.
Yes. The belt is bi-directional, but follow your machine’s required running direction.
Aluminum oxide is the general-purpose choice for everyday wood and metal sanding. For applications centered on more aggressive steel stock removal or demanding grinding, consider the appropriate Benchmark Abrasives zirconia or ceramic belt for the material and machine.
The Benchmark Abrasives 1" x 30" aluminum oxide sanding belt is a Made in USA, general-purpose abrasive belt for sanding, shaping, and surface preparation on wood and metal. The compact 1" x 30" size is popular for benchtop sanders, smaller fabrication setups, detail work, and entry-level knife-making grinders.
Aluminum oxide provides a practical balance of cutting performance and value for everyday sanding. Available from aggressive 24 grit through fine 400 grit, this belt gives you options for material removal, shaping, blending, scratch refinement, and finer finishing without changing abrasive families.
*Wet use also depends on whether the machine and application are approved for wet operation.
Product Features
Aluminum oxide grain for general-purpose sanding on wood and metal
X-weight polycotton cloth backing for support during sanding
Closed-coat construction provides dense abrasive coverage
Butt-joint construction allows the belt to run in either direction
Wide 24–400 grit selection for coarse sanding through finer surface refinement
Made in USA
Materials & Applications
Best For: General-purpose wood and metal sanding on compact 1" x 30" belt sanders./p>
Common applications include:
Surface sanding and preparation
Shaping and contour work
Edge and detail sanding
Removing surface imperfections
Progressive scratch refinement
General fabrication and maintenance work
Smaller knife-making and hobby-shop sanding applications
Machine Compatibility
Designed for machines using a 1" x 30" sanding belt, including benchtop belt sanders, belt/disc combination machines, compact grinders, and smaller knife-making setups.
Fits machines designed for 1" x 30" sanding belts, including:
RIKON® 50-151 Belt/Disc Sander
RIKON® 50-161VS Variable-Speed Belt/Disc Sander
Grizzly® H6070 Belt/Disc Sander
WEN® 6515T Belt/Disc Sander
Harbor Freight® 58359 Belt Sander
Always confirm your machine's required belt dimensions, configuration, and operating-speed requirements before use.
Tips for Better Belt Performance
Use these aluminum oxide belts for dry sanding only.
Allow the abrasive to do the cutting rather than applying excessive pressure.
Keep the belt tracking correctly and inspect it before use.
A sanding belt cleaning stick can help remove accumulated material from the abrasive surface when appropriate.
Always use the guards and PPE required for your machine and application.
Frequently Asked Questions
No. Benchmark recommends these aluminum oxide sanding belts for dry use only.
This belt is designed for machines that use 1" x 30" sanding belts. Examples include RIKON® 50-151 and 50-161VS, Grizzly® H6070, WEN® 6515T, and Harbor Freight® item 58359. Other machines using this belt size may also be compatible. Check your exact model and installed setup before ordering, and follow the machine and belt speed requirements. For metal grinding, use a machine approved for metalwork.
Yes. The compact belt size works well for smaller knife-making setups, shaping, detail sanding, and general shop work. For higher-production knife grinding and larger contact-wheel or platen setups, 2" x 72" grinders are the more common dedicated format.
Use 24–36 grit for very aggressive removal, 40–60 grit for coarse sanding and shaping, 80–100 grit for general smoothing, 120–220 grit for fine sanding and refinement, and 240–400 grit for very fine finishing.
Yes. The belt is bi-directional, but follow your machine’s required running direction.
Aluminum oxide is the general-purpose choice for everyday wood and metal sanding. For applications centered on more aggressive steel stock removal or demanding grinding, consider the appropriate Benchmark Abrasives zirconia or ceramic belt for the material and machine.
SHIPPING
FREE LIGHTNING FAST SHIPPING!
You read that right, Free shipping on orders over $100 + Orders placed before 12 noon PST = SHIP SAME DAY!
Orders placed after noon will ship the following day.
Standard FREE shipping is UPS Ground or USPS priority depending on size and weight. Most customers receive
their order within 3-5 days from date of purchase. Faster shipping options available for additional charge.
Free shipping not available on international orders. Free shipping will only be available to orders being
delivered within the lower 48 states.
Refund
Not happy with your product? Welcome to hassle free returns. Just shoot us an email, call the toll free number
or click the chat button below. One of our helpful employees will get you set up with an RGA and return
shipping info.
