1" X 30" SURFACE CONDITIONING NON-WOVEN SANDING BELT
The Benchmark Abrasives 1" x 30" surface conditioning non-woven sanding belt is a Made in USA finishing belt designed for blending, deburring, surface refinement, and creating a more uniform brushed appearance on metal. Its flexible non-woven construction follows edges and contours while helping reduce the pronounced scratch pattern left by conventional coated abrasive belts.
Available in Coarse, Medium, and Fine grades, this belt is ideal for the finishing stages after grinding and sanding. Use it to blend previous sanding marks, refine fabricated surfaces, clean up edges, and prepare metal for the desired final appearance without treating it as a heavy stock-removal abrasive.
Quantity: 1 Belt
Product Specifications
Specification
Details
Belt Size
1" x 30"
Abrasive Type
Surface Conditioning Non-Woven
Available Grades
Coarse, Medium, Fine
Direction
Bi-Directional
Use
Wet or Dry*
Country of Origin
Made in USA
*Wet use also depends on whether the machine and application are approved for wet operation.
Product Features
Non-woven surface conditioning construction for blending and finishing metal
Flexible belt conforms to edges, contours, and shaped surfaces
Helps refine scratch patterns left by coated abrasive sanding
Coarse, Medium, and Fine grades for progressive surface finishing
Bi-directional construction
Suitable for wet or dry use when the machine allows it
Made in USA
Materials & Applications
Best For: Metal blending, surface refinement, and brushed finishing after coated-abrasive sanding.
Common applications include:
Blending sanding marks
Deburring
Edge cleanup
Surface refinement
Brushed metal finishing
Removing light surface imperfections
Preparing metal for additional finishing steps
Knife blade finishing
Fabrication cleanup
General maintenance finishing
This belt is intended for surface conditioning and finishing, not aggressive stock removal or heavy grinding.
Designed for equipment using a nominal 1" x 30" sanding belt, but non-woven belts can differ in thickness and flexibility from conventional coated abrasive belts.
Before use, confirm that your machine provides adequate:
Belt and guard clearance
Pulley clearance
Belt tension and tracking adjustment
Operating speed suitable for the non-woven belt
Do not assume compatibility based on the 1" x 30" dimensions alone. Confirm the machine configuration and operating requirements before use.
Tips for Better Belt Performance
Complete heavy grinding and stock removal with a coated abrasive belt before switching to surface conditioning.
Start with the grade needed for the existing surface rather than automatically beginning with Coarse.
Use light to moderate pressure and allow the non-woven material to work across the surface.
Maintain consistent movement when creating a directional or brushed finish.
Confirm adequate machine clearance before installing a non-woven belt.
If using the belt wet, verify that the machine and application are approved for wet operation.
Always follow the machine manufacturer's guarding and PPE requirements.
Frequently Asked Questions
It is designed for blending, deburring, scratch refinement, brushed finishing, and general surface conditioning on metal.
No. Use a coated abrasive such as ceramic, zirconia, or aluminum oxide for grinding and material removal, then switch to the surface conditioning belt for blending and finishing.
Choose Coarse for more aggressive blending and deburring, Medium for general surface conditioning and brushed finishing, and Fine for lighter refinement and a finer finished appearance.
No. Non-woven surface conditioning grades do not have universal direct equivalents to coated-abrasive grit numbers.
Yes. It can be used after coated-abrasive sanding to blend scratches and create a more uniform brushed appearance on knife blades and other metal components.
This belt is designed for machines that use 1" x 30" non-woven sanding belts. Examples include RIKON® 50-151 and 50-161VS, Grizzly® H6070, WEN® 6515T, and Harbor Freight® item 58359. Other machines using this belt size may also be compatible. Non-woven belts can be thicker than coated belts, so confirm wheel and guard clearance, tension adjustment, and the approved belt speed before ordering.
Yes. The belt is designed for wet or dry use, but wet operation should only be used when the machine and application are approved for it.
Yes. The belt is bi-directional, but follow your machine's required running direction.
No. Surface conditioning belts are intended for blending and brushed or refined finishes. Mirror polishing requires additional polishing steps and products.
1" X 30" SURFACE CONDITIONING NON-WOVEN SANDING BELT
The Benchmark Abrasives 1" x 30" surface conditioning non-woven sanding belt is a Made in USA finishing belt designed for blending, deburring, surface refinement, and creating a more uniform brushed appearance on metal. Its flexible non-woven construction follows edges and contours while helping reduce the pronounced scratch pattern left by conventional coated abrasive belts.
Available in Coarse, Medium, and Fine grades, this belt is ideal for the finishing stages after grinding and sanding. Use it to blend previous sanding marks, refine fabricated surfaces, clean up edges, and prepare metal for the desired final appearance without treating it as a heavy stock-removal abrasive.
Quantity: 1 Belt
Product Specifications
Specification
Details
Belt Size
1" x 30"
Abrasive Type
Surface Conditioning Non-Woven
Available Grades
Coarse, Medium, Fine
Direction
Bi-Directional
Use
Wet or Dry*
Country of Origin
Made in USA
*Wet use also depends on whether the machine and application are approved for wet operation.
Product Features
Non-woven surface conditioning construction for blending and finishing metal
Flexible belt conforms to edges, contours, and shaped surfaces
Helps refine scratch patterns left by coated abrasive sanding
Coarse, Medium, and Fine grades for progressive surface finishing
Bi-directional construction
Suitable for wet or dry use when the machine allows it
Made in USA
Materials & Applications
Best For: Metal blending, surface refinement, and brushed finishing after coated-abrasive sanding.
Common applications include:
Blending sanding marks
Deburring
Edge cleanup
Surface refinement
Brushed metal finishing
Removing light surface imperfections
Preparing metal for additional finishing steps
Knife blade finishing
Fabrication cleanup
General maintenance finishing
This belt is intended for surface conditioning and finishing, not aggressive stock removal or heavy grinding.
Designed for equipment using a nominal 1" x 30" sanding belt, but non-woven belts can differ in thickness and flexibility from conventional coated abrasive belts.
Before use, confirm that your machine provides adequate:
Belt and guard clearance
Pulley clearance
Belt tension and tracking adjustment
Operating speed suitable for the non-woven belt
Do not assume compatibility based on the 1" x 30" dimensions alone. Confirm the machine configuration and operating requirements before use.
Tips for Better Belt Performance
Complete heavy grinding and stock removal with a coated abrasive belt before switching to surface conditioning.
Start with the grade needed for the existing surface rather than automatically beginning with Coarse.
Use light to moderate pressure and allow the non-woven material to work across the surface.
Maintain consistent movement when creating a directional or brushed finish.
Confirm adequate machine clearance before installing a non-woven belt.
If using the belt wet, verify that the machine and application are approved for wet operation.
Always follow the machine manufacturer's guarding and PPE requirements.
Frequently Asked Questions
It is designed for blending, deburring, scratch refinement, brushed finishing, and general surface conditioning on metal.
No. Use a coated abrasive such as ceramic, zirconia, or aluminum oxide for grinding and material removal, then switch to the surface conditioning belt for blending and finishing.
Choose Coarse for more aggressive blending and deburring, Medium for general surface conditioning and brushed finishing, and Fine for lighter refinement and a finer finished appearance.
No. Non-woven surface conditioning grades do not have universal direct equivalents to coated-abrasive grit numbers.
Yes. It can be used after coated-abrasive sanding to blend scratches and create a more uniform brushed appearance on knife blades and other metal components.
This belt is designed for machines that use 1" x 30" non-woven sanding belts. Examples include RIKON® 50-151 and 50-161VS, Grizzly® H6070, WEN® 6515T, and Harbor Freight® item 58359. Other machines using this belt size may also be compatible. Non-woven belts can be thicker than coated belts, so confirm wheel and guard clearance, tension adjustment, and the approved belt speed before ordering.
Yes. The belt is designed for wet or dry use, but wet operation should only be used when the machine and application are approved for it.
Yes. The belt is bi-directional, but follow your machine's required running direction.
No. Surface conditioning belts are intended for blending and brushed or refined finishes. Mirror polishing requires additional polishing steps and products.
SHIPPING
FREE LIGHTNING FAST SHIPPING!
You read that right, Free shipping on orders over $100 + Orders placed before 12 noon PST = SHIP SAME DAY!
Orders placed after noon will ship the following day.
Standard FREE shipping is UPS Ground or USPS priority depending on size and weight. Most customers receive
their order within 3-5 days from date of purchase. Faster shipping options available for additional charge.
Free shipping not available on international orders. Free shipping will only be available to orders being
delivered within the lower 48 states.
Refund
Not happy with your product? Welcome to hassle free returns. Just shoot us an email, call the toll free number
or click the chat button below. One of our helpful employees will get you set up with an RGA and return
shipping info.
