14" 120-TOOTH TCT SAW BLADE FOR STEEL & FERROUS METAL
The Benchmark Abrasives 14" 120-Tooth TCT Saw Blade is designed for smooth, controlled cutting of steel and other ferrous metals on compatible low-RPM dry-cut saws. Its high 120-tooth configuration and TCG (Triple Chip Grind) tooth geometry prioritize edge quality, making it the finish-focused choice in our 14" steel blade lineup.
Tungsten carbide-tipped teeth help produce clean cuts with fewer sparks and less heat than traditional abrasive cutting methods. The 1" arbor and 0.098" kerf provide a stable cutting setup for steel tubing, angle iron, plate, pipe, rebar and flat stock where reduced burrs and secondary cleanup are important.
Quantity: 1 Blade
Product Specifications
Specification
Details
Blade Diameter
14"
Tooth Count
120 Teeth
Blade Type
Tungsten Carbide Tipped (TCT)
Tooth Geometry
TCG − Triple Chip Grind
Arbor / Bore
1"
Kerf
0.098"
Maximum RPM
1,800 RPM
Primary Material
Steel & Ferrous Metals
Compatible Tool Type
Low-RPM Dry-Cut Saws
Product Features
120-tooth configuration prioritizes smoother edge quality for finish-sensitive steel cutting.
TCG tooth geometry helps distribute the cutting load across alternating tooth profiles for durable metal-cutting performance.
Tungsten carbide-tipped teeth provide a long-lasting cutting edge for repeated steel cutting.
0.098" kerf provides a stable cutting path through common ferrous-metal shapes.
Reduced sparks and heat compared with traditional abrasive cutting methods help provide a cleaner cutting experience.
1,800 RPM maximum speed identifies the operating limit for proper machine selection.
Materials & Applications
Best For
Mild steel
Steel
Wrought iron
Square tubing
Round pipe and tubing
Angle iron
Rebar
Flat stock
Steel plate up to 1/8"
The 120-tooth configuration is especially well suited for fabrication, installation and finish-sensitive metalworking where smooth edge quality and reduced post-cut cleanup are more important than maximum cutting speed.
Machine Compatibility
Designed for compatible 14" low-RPM dry-cut saws that accept a 1" arbor and operate within the blade's maximum speed rating.
Common compatible saws include:
DEWALT® DW872
Evolution ® models LC1230, S14CPS, R355CPS and S355CPSL
Always verify your saw's blade diameter, arbor size and operating RPM before installation. The saw must not exceed the blade's 1,800 RPM maximum rating.
Choosing the Right Tooth Count
Within Benchmark's 14" steel blade lineup, the 120-tooth blade is the finish-focused option, providing the smoothest edge of the 66T, 80T and 120T choices.
Tips for Better Blade Performance
Secure the workpiece firmly before cutting.
Use a steady, controlled feed rate and allow the carbide teeth to perform the cut.
Avoid forcing the blade through the material.
Keep chips and debris clear of the cutting path.
Inspect the blade before use for damaged, missing or excessively worn teeth.
Replace or professionally sharpen the blade when cutting performance noticeably declines.
Saw blade lubricant can help reduce buildup and extend blade life during demanding applications.
Never exceed the blade's 1,800 RPM maximum operating speed.
Safety
Use only on saws designed to accept this blade diameter and arbor configuration.
Never install the blade on a machine that exceeds the blade's maximum RPM.
Keep all factory guards installed and properly functioning.
Inspect the blade before every use. Do not use a cracked, warped or damaged blade.
Secure the workpiece before cutting and maintain control throughout the cut.
Do not use this blade on stainless steel or hardened materials.
Wear appropriate eye, hearing, respiratory and hand protection for the application.
Frequently Asked Questions
This blade is designed for mild steel and other ferrous metals, including non-hardened ferrous steel. It is well suited for square tubing, angle iron, pipe, rebar, flat stock and steel plate up to 1/8".
Choose the 66-tooth blade when faster cutting and productivity are the priority. Choose the 80-tooth blade for a balance of cutting efficiency and smoother edge quality. Choose the 120-tooth blade when the smoothest finished edge is the highest priority.
The 120T keeps more teeth engaged with the material during the cut, which generally favors a smoother finished edge and reduced cleanup. The 80T is the more balanced choice when both cutting efficiency and finish quality matter.
Yes. Higher tooth counts are generally better suited to thinner material and finish-sensitive cuts because more teeth remain engaged with the workpiece during cutting.
Generally, yes. Higher tooth counts favor edge quality over maximum cutting speed. The 120T is intended for applications where a smoother finished cut is more important than the fastest possible feed rate.
TCG stands for Triple Chip Grind. The alternating tooth profiles share the chip load, helping improve cutting-tip toughness and support cooler, controlled cutting in ferrous metals.
Yes. Carbide-tipped metal-cutting blades typically produce fewer sparks and less heat than traditional abrasive cutting methods when used in the proper application.
This blade is designed for compatible low-RPM dry-cut saws and has a maximum operating speed of 1,800 RPM. Never install it on a saw that operates above the maximum RPM marked on the blade.
No. This blade is not recommended for stainless steel or hardened materials. Use a saw blade specifically rated for the stainless.
This blade is designed for steel and ferrous-metal cutting. For aluminum and other non-ferrous metals, use a Benchmark Abrasives TCT blade specifically designed for aluminum.
Common compatible saws include the Evolution S14CPS, Evolution S355CPSL, Evolution R355CPS and DEWALT DW872 14-inch carbide metal-cutting saws. These machines use a 1-inch arbor, operate at 1,450 RPM or less and are intended for ferrous-metal cutting. Confirm compatibility with the exact saw model and version, including flange engagement, guard clearance, blade rotation and permitted material.
14" 120-TOOTH TCT SAW BLADE FOR STEEL & FERROUS METAL
The Benchmark Abrasives 14" 120-Tooth TCT Saw Blade is designed for smooth, controlled cutting of steel and other ferrous metals on compatible low-RPM dry-cut saws. Its high 120-tooth configuration and TCG (Triple Chip Grind) tooth geometry prioritize edge quality, making it the finish-focused choice in our 14" steel blade lineup.
Tungsten carbide-tipped teeth help produce clean cuts with fewer sparks and less heat than traditional abrasive cutting methods. The 1" arbor and 0.098" kerf provide a stable cutting setup for steel tubing, angle iron, plate, pipe, rebar and flat stock where reduced burrs and secondary cleanup are important.
Quantity: 1 Blade
Product Specifications
Specification
Details
Blade Diameter
14"
Tooth Count
120 Teeth
Blade Type
Tungsten Carbide Tipped (TCT)
Tooth Geometry
TCG − Triple Chip Grind
Arbor / Bore
1"
Kerf
0.098"
Maximum RPM
1,800 RPM
Primary Material
Steel & Ferrous Metals
Compatible Tool Type
Low-RPM Dry-Cut Saws
Product Features
120-tooth configuration prioritizes smoother edge quality for finish-sensitive steel cutting.
TCG tooth geometry helps distribute the cutting load across alternating tooth profiles for durable metal-cutting performance.
Tungsten carbide-tipped teeth provide a long-lasting cutting edge for repeated steel cutting.
0.098" kerf provides a stable cutting path through common ferrous-metal shapes.
Reduced sparks and heat compared with traditional abrasive cutting methods help provide a cleaner cutting experience.
1,800 RPM maximum speed identifies the operating limit for proper machine selection.
Materials & Applications
Best For
Mild steel
Steel
Wrought iron
Square tubing
Round pipe and tubing
Angle iron
Rebar
Flat stock
Steel plate up to 1/8"
The 120-tooth configuration is especially well suited for fabrication, installation and finish-sensitive metalworking where smooth edge quality and reduced post-cut cleanup are more important than maximum cutting speed.
Machine Compatibility
Designed for compatible 14" low-RPM dry-cut saws that accept a 1" arbor and operate within the blade's maximum speed rating.
Common compatible saws include:
DEWALT® DW872
Evolution ® models LC1230, S14CPS, R355CPS and S355CPSL
Always verify your saw's blade diameter, arbor size and operating RPM before installation. The saw must not exceed the blade's 1,800 RPM maximum rating.
Choosing the Right Tooth Count
Within Benchmark's 14" steel blade lineup, the 120-tooth blade is the finish-focused option, providing the smoothest edge of the 66T, 80T and 120T choices.
Tips for Better Blade Performance
Secure the workpiece firmly before cutting.
Use a steady, controlled feed rate and allow the carbide teeth to perform the cut.
Avoid forcing the blade through the material.
Keep chips and debris clear of the cutting path.
Inspect the blade before use for damaged, missing or excessively worn teeth.
Replace or professionally sharpen the blade when cutting performance noticeably declines.
Saw blade lubricant can help reduce buildup and extend blade life during demanding applications.
Never exceed the blade's 1,800 RPM maximum operating speed.
Safety
Use only on saws designed to accept this blade diameter and arbor configuration.
Never install the blade on a machine that exceeds the blade's maximum RPM.
Keep all factory guards installed and properly functioning.
Inspect the blade before every use. Do not use a cracked, warped or damaged blade.
Secure the workpiece before cutting and maintain control throughout the cut.
Do not use this blade on stainless steel or hardened materials.
Wear appropriate eye, hearing, respiratory and hand protection for the application.
Frequently Asked Questions
This blade is designed for mild steel and other ferrous metals, including non-hardened ferrous steel. It is well suited for square tubing, angle iron, pipe, rebar, flat stock and steel plate up to 1/8".
Choose the 66-tooth blade when faster cutting and productivity are the priority. Choose the 80-tooth blade for a balance of cutting efficiency and smoother edge quality. Choose the 120-tooth blade when the smoothest finished edge is the highest priority.
The 120T keeps more teeth engaged with the material during the cut, which generally favors a smoother finished edge and reduced cleanup. The 80T is the more balanced choice when both cutting efficiency and finish quality matter.
Yes. Higher tooth counts are generally better suited to thinner material and finish-sensitive cuts because more teeth remain engaged with the workpiece during cutting.
Generally, yes. Higher tooth counts favor edge quality over maximum cutting speed. The 120T is intended for applications where a smoother finished cut is more important than the fastest possible feed rate.
TCG stands for Triple Chip Grind. The alternating tooth profiles share the chip load, helping improve cutting-tip toughness and support cooler, controlled cutting in ferrous metals.
Yes. Carbide-tipped metal-cutting blades typically produce fewer sparks and less heat than traditional abrasive cutting methods when used in the proper application.
This blade is designed for compatible low-RPM dry-cut saws and has a maximum operating speed of 1,800 RPM. Never install it on a saw that operates above the maximum RPM marked on the blade.
No. This blade is not recommended for stainless steel or hardened materials. Use a saw blade specifically rated for the stainless.
This blade is designed for steel and ferrous-metal cutting. For aluminum and other non-ferrous metals, use a Benchmark Abrasives TCT blade specifically designed for aluminum.
Common compatible saws include the Evolution S14CPS, Evolution S355CPSL, Evolution R355CPS and DEWALT DW872 14-inch carbide metal-cutting saws. These machines use a 1-inch arbor, operate at 1,450 RPM or less and are intended for ferrous-metal cutting. Confirm compatibility with the exact saw model and version, including flange engagement, guard clearance, blade rotation and permitted material.
SHIPPING
FREE LIGHTNING FAST SHIPPING!
You read that right, Free shipping on orders over $100 + Orders placed before 12 noon PST = SHIP SAME DAY!
Orders placed after noon will ship the following day.
Standard FREE shipping is UPS Ground or USPS priority depending on size and weight. Most customers receive
their order within 3-5 days from date of purchase. Faster shipping options available for additional charge.
Free shipping not available on international orders. Free shipping will only be available to orders being
delivered within the lower 48 states.
Refund
Not happy with your product? Welcome to hassle free returns. Just shoot us an email, call the toll free number
or click the chat button below. One of our helpful employees will get you set up with an RGA and return
shipping info.
