4-1/2" Continuous Rim Diamond Blade

• Product Specification
• Shipping
• Refund

Product Specification

4-1/2” CONTINUOUS RIM DIAMOND BLADE

Built for cleaner, more controlled cutting in tile and stone, the Benchmark Abrasives 4-1/2” Continuous Rim Diamond Blade is designed for ceramic tile, porcelain tile, granite, natural stone, and marble. Its continuous diamond rim maintains constant contact with the material to help produce a smoother finished edge with less chipping than an aggressive segmented masonry blade.

The 10 mm diamond rim provides substantial usable cutting depth, while the 4-1/2” diameter gives users additional reach for larger tile and stone work without sacrificing control. Rated up to 13,580 RPM, this blade is built for precision-focused cutting where edge quality and a cleaner finish are more important than maximum material-removal speed.

Product Specifications

Features

• Continuous diamond rim designed for cleaner tile and stone cutting
• Helps reduce edge chipping compared with aggressive segmented-rim blades
• 10 mm diamond rim height
• Designed for ceramic, porcelain, granite, natural stone, and marble
• 4-1/2" diameter provides additional reach over smaller tile blades
• Well suited for precision cuts and finish-sensitive applications
• Continuous-rim design maintains consistent contact with the material
• Rated up to 13,580 RPM
• Wet cutting helps cool the blade and manage cutting debris

Applications & Performance

Designed for tile and stone cutting where a smoother finished edge is preferred over the faster, rougher cut produced by a segmented masonry blade.

• Ceramic tile cutting
• Porcelain tile cutting
• Granite cutting
• Marble cutting
• Natural stone cutting
• Tile installation and remodeling
• Straight cuts
• Trimming and detail work
• Finish-sensitive stone applications
• Larger tile and stone cuts requiring additional reach

The continuous rim provides uninterrupted diamond contact with the workpiece, helping produce a smoother edge and more controlled cut than an open segmented rim.

Materials

• Ceramic Tile
• Porcelain Tile
• Granite
• Natural Stone
• Marble

Machine Compatibility

For use with 4-1/2” wet tile and masonry saws.

Compatible examples include:

• FLEX® CS 40 Wet Masonry Saw — 12,000 RPM; wet cutting with 7/8" mounting. Confirm the 4-1/2" blade’s reach, guard clearance and water delivery in this 5"-capacity saw. The blade must have a matching 7/8" bore. Confirm this blade has the required 7/8" mounting.

Other models may also fit. Match the mounting, speed rating and required guard to your tool. Use continuous water flow as directed by the blade and saw instructions.

Safety Tips

• Never exceed the blade’s maximum rated speed of 13,580 RPM.
• Use this blade with equipment approved for wet cutting and maintain the required water supply.
• Maintain the water supply required by the machine throughout cutting.
• Inspect the blade, rim, mounting opening, and flanges before each use. Do not use a damaged or distorted blade.
• Verify the exact arbor and flange arrangement before installation.
• Never enlarge the mounting opening or use improvised or loose reducing bushings.
• Use the guard required by the machine manufacturer.
• Allow the blade to cut at its own rate; excessive pressure can reduce cut quality and increase heat.
• Do not side-load or grind with the sides of the blade unless the exact accessory is specifically approved for that operation.
• Use appropriate eye, hearing, respiratory, and other required personal protective equipment.
• Cutting stone or masonry materials can generate respirable silica. Use the required water-delivery and other task-appropriate dust-control measures.