Product Specification
4-1/2" X 5/8" X 5/8"-11 CRIMPED WIRE WHEEL - CARBON STEEL
For flexible surface cleaning on carbon steel and other ferrous metals, the 4-1/2" x 5/8" x 5/8"-11 Crimped Wire Wheel - Carbon Steel gives you a broader cleaning path than a narrow stringer-style wheel while remaining more forgiving than a knotted-wire wheel. It is designed for light rust, oxidation, deposits, and general surface contamination where controlled cleaning is more important than maximum aggression.
The crimped wire construction flexes as it contacts the workpiece, helping the wheel follow flat and contoured surfaces while maintaining consistent contact. Its 5/8" face width provides useful coverage for fabrication, maintenance, weld-area cleanup, and general surface preparation without the stiffness of a twist-knot wheel.
A 4-1/2" diameter, 5/8"-11 threaded arbor, and 12,500 RPM maximum rating make this wheel a natural fit for compatible angle grinders. The published source lists a wire diameter value that is flagged as unreliable, so the wire diameter is intentionally omitted from this listing pending confirmation.
Product Specifications
| Specification |
Details |
| Diameter |
4-1/2" |
| Face Width |
5/8" |
| Wire Diameter |
0.0118" |
| Wire Material |
Carbon Steel |
| Wire Style |
Crimped |
| Arbor |
5/8"-11 Threaded |
| Maximum RPM |
12,500 |
Features
-
4-1/2" diameter for efficient grinder-mounted cleaning
-
5/8" face width for broader surface contact
- Flexible crimped carbon steel wire for controlled cleaning
- More conformable and less aggressive than knotted-wire wheels
- Excellent for light rust, oxidation, deposits, and surface contamination
- Strong choice for general fabrication, maintenance, and surface preparation
-
5/8"-11 threaded arbor for direct spin-on grinder mounting
- 12,500 RPM maximum rating
- Better suited to broad cleaning than narrow stringer-bead work
Applications & Performance
This crimped wire wheel is designed for flexible surface cleaning and light-to-moderate contamination removal on compatible ferrous metals.
Common applications include:
- Light rust removal
- Oxidation cleanup
- Surface contamination removal
- Light weld-area cleanup
- Cleaning fabricated steel parts
- Cleaning flat and contoured surfaces
- Removing light deposits
- Edge and transition cleanup
- Maintenance and repair work
- Surface preparation before coating or finishing
The flexible crimped wire helps the wheel conform to the workpiece instead of concentrating force into a narrow line. That makes it a better choice than a stringer wheel when broader coverage is the goal.
Use light to moderate pressure and allow the wire tips to do the cleaning.
Materials
Recommended for cleaning and surface preparation on compatible ferrous materials, including:
- Carbon steel
- Mild steel
- Structural steel
- Cast iron
- Wrought iron
- Other compatible ferrous metal surfaces
Keep carbon steel brushes dedicated to ferrous work when cross-contamination matters. For stainless-steel applications where iron contamination must be minimized, use a dedicated stainless steel wire brush.
Machine Compatibility
Use this 4-1/2" wire wheel on a compatible angle grinder with a 5/8"-11 spindle, adequate brush capacity and a maximum speed no greater than 12,500 RPM. Match the actual hub seating and allow room for wire flare.
Compatible examples include:
-
Benchmark Abrasives BMT-AGBC4570_1 — 4-1/2" corded angle grinder; 5/8"-11 spindle; 11,000 RPM.
-
Milwaukee® 2880-20 — 4-1/2" / 5" angle grinder; 8,500 RPM.
-
Milwaukee® 2881-20 — 4-1/2" / 5" angle grinder; 8,500 RPM.
Other machines may be compatible. Use the manufacturer-specified wire-brushing setup and guard, with secure hub engagement and adequate operating clearance. Other grinders meeting these requirements may also be suitable.
Safety Tips
- Never exceed the brush's 12,500 RPM maximum speed.
- Confirm the grinder permits use of threaded wire wheels of this diameter.
- Make sure the 5/8"-11 threaded arbor is fully seated and secure before operation.
- Verify adequate guard and operating clearance before use.
- Inspect the wheel before every use and replace it if damaged, excessively worn, loose, or distorted.
- Maintain clearance for normal wire flare during operation.
- Wear proper PPE, including eye and face protection, hearing protection, gloves, appropriate clothing, and respiratory protection when required.
- Keep bystanders away from the work area and direction of rotation.
- Use light to moderate pressure. Excessive force can flatten the crimped wire and accelerate wear.
- Allow the grinder to reach operating speed before contacting the workpiece.
- Follow all operating and safety instructions for both the grinder and wire wheel.
