The Benchmark Abrasives SF-41 Tree Shape Radius Premium Tungsten Carbide Burr is built for fabricators, machinists, welders, and metalworkers who need controlled cutting performance on rounded contours, edge transitions, and detailed shaping work. Unlike lower quality burrs that may use hollow heads or inconsistent brazing, Benchmark carbide burrs feature a solid carbide head with a silver-brazed connection to the shank. The result is a strong, stable cutting tool designed for demanding deburring, contouring, edge rounding, and localized material-removal applications.
The SF-41 combines that premium construction with a compact 1/8" tree-shaped head, rounded radius end, and double-cut tooth pattern. Its tapered tree profile provides a gradual change in cutting diameter for working along rounded contours and transitional surfaces, while the radius end helps soften edges and blend curved features without the sharp point of a pointed-tree burr.
With both a 1/8" head and 1/8" shank, the SF-41 is a compact option for detailed metalworking and precision contouring. Its small profile provides excellent access to narrow and confined features, while the standard-length 1/8" head is rated for a maximum speed of 90,000 RPM.
Features
- Premium tungsten carbide construction
- Double-cut design for efficient, controlled stock removal
- Compact 1/8" tree-shaped head for detailed contouring
- Radius end for rounded transitions and edge work
- Tapered profile for variable cutting contact
- Produces smaller chips than a comparable single-cut burr
- 1/8" shank for compatible rotary tools and precision grinders
- Suitable for deburring, contouring, edge rounding, and localized material removal
- Sold individually
Applications
The SF-41 tree radius-end profile is well suited for:
- Rounded contours
- Edge rounding
- Blended transitions
- Curved interior features
- Narrow contour work
- Detailed deburring
- Recess shaping
- Localized stock removal
- General fabrication and maintenance work
Materials
Recommended primarily for:
- Steel
- Stainless steel
- Cast iron
Also suitable for additional materials when the correct operating speed and technique are used, including titanium, nickel, wrought iron, copper, fiberglass, plastic, hard rubber, wood, and stone.
Machine Compatibility
Designed for rotary tools, precision grinders, and other compatible machines equipped with a properly sized 1/8" collet or chuck.
Compatible examples include Dremel® 4300, 4000, and 3000 fitted with a Dremel 480 1/8" collet and matching collet nut. The 4300 can also hold the 1/8" shank in its keyless chuck.
Always confirm the 1/8" shank is securely seated in the correct collet or chuck before operation. A 1/8" shank is not interchangeable with 3 mm tooling.
Cutting Performance
The SF-41 tree radius-end shape combines a tapered body with a rounded tip, giving it a smooth progression of cutting diameters from the wider body toward the end. This geometry is especially useful for rounded contours, edge transitions, recessed shapes, and areas where a gradual change in contact width improves control.
The rounded end distinguishes the SF profile from a pointed-tree burr by providing a softer transition into curved features and helping shape or round edges without concentrating the cut at a sharp point. The double-cut tooth pattern divides removed material into smaller chips for controlled stock removal and a smoother working action than a comparable single-cut burr.
Carbide burrs are primarily cutting and shaping tools; applications requiring a refined cosmetic finish should be followed with the appropriate abrasive finishing process.
Use the chart above to select the recommended operating-speed range based on the 1/8" burr head diameter and workpiece material.
Do not exceed the 90,000 RPM maximum speed for this standard-length 1/8" carbide burr. Always operate within the lower maximum speed of the burr, machine, collet, chuck, or accessory system.
Safety Tips
- Always wear appropriate eye, hearing, respiratory, and hand protection.
- Secure the workpiece before beginning operation.
- Confirm the 1/8" shank is properly seated and securely tightened in the correct collet or chuck.
- Use light, controlled pressure and allow the carbide cutting edges to remove the material.
- Keep the burr moving during cutting rather than holding it stationary against the workpiece.
- Maintain controlled movement when working around edges and curved transitions.
- Avoid excessive force, especially with the small 1/8" head diameter.
- Select operating speed according to burr diameter, workpiece material, machine requirements, and the recommended operating-speed chart.
- Never exceed 90,000 RPM.
- Stop immediately if excessive vibration, chatter, unusual noise, or visible damage occurs.
- Do not use a damaged, chipped, bent, or improperly mounted carbide burr.
