Skip to content

Nylon Brushes Guide: Types, Features, Applications

Nylon Brushes Guide

A nylon brush is made of nylon polymer filaments, which are incredibly resilient, robust, flexible, and elastic. Nylon filaments are popular for making brushes because they are strong and abrasion-resistant. Nylon wire brushes are strong and durable because of their resistance to chemicals and their capacity to handle extremely high temperatures (up to 350° F).

The word "nylon" is a collective noun for synthetic polymers, also referred to as polyamide-nylon, an organic thermoplastic. Since the DuPont company first introduced nylon in 1938, its use as a flexible synthetic fabric with several applications has risen quickly.

Types Of Nylon Brushes

1. Floor Scrubbers

Nylon has a strong bend recovery and abrasion resistance, which makes it suitable for floor scrubbers. Due to these characteristics, it has a long wear life and can clean harsh surfaces like parking lots and concrete floors.

2. Cylinder Brushes

Cylindrical abrasive brushes offer intense cleaning while being adaptable and flexible. For cylinder nylon brushes, the grit can range from a very coarse 46 grit, which is extremely aggressive, to a very fine 600 grit. Cylinder brushes have flexible shafts that can be either solid or tubular for reloading or replenishing the filaments.

3. Wheel Brushes

Wheel brushes are frequently used for deburring, blending edges, and final surface finishing. Wheel brushes made of nylon are a viable substitute for conventional wheel brushes because they are secure and non-reactive. They come in a huge range of sizes, with centers made of steel or copper, and with or without shanks.

4. Cup Brushes

Wheel brushes and cup brushes both have the same purpose. Nylon cup brushes are smaller and have one, two, or three-inch diameters. Nylon filaments can be used as a high-speed angle grinder or for light deposit removal depending on their density and rigidity.

5. Twisted Wire Brushes

Depending on the use, twisted wire brushes come in a variety of styles. Handheld single stem tube brushes include wire handles that range in length from 6 to 16 inches. For vigorous brushing with power tools, double stem tube brushes are employed; burr removal variants are shorter, with brushes measuring about an inch.

6. Strip Brushes

With a metal channel and compressed or bonded nylon filaments, nylon strip brushes have the most basic design. They have a long lifespan, are resistant to abrasion, absorb little water, recover well from bends, are resistant to cleaning solvents, and are unaffected by weak acids. They can be used to sweep away loose debris, apply coatings, reduce static electricity, or clean conveyors.

7. Hand Brushes

Nylon hand brushes come in a variety of shapes and sizes, including scratch, channel, welder, toothbrush-style channel, platers, acid swabs, chips, parts cleaners, and others. The typical hand brush has been in use for a very long time. Modern producers have improved these everyday objects by utilizing cutting-edge technical techniques to provide a hand brush for every circumstance, use, or setting.

Components Of Nylon Brushes

A handle and nylon filaments make up the essential components of a nylon wire brush. The two parts are combined and fastened together throughout the manufacturing process to create a practical and useful instrument. The differences between the different kinds of nylon brushes are related to the handle designs and the way that the nylon filaments are cut and produced.

A. Filament

The first stage in developing a nylon brush is to choose the filaments that will be used, which will decide the brush's kind and intended use. Nylon 6, Nylon 66, Nylon 610, Nylon 612, Nylon 11, and Nylon 12 are examples of common nylon filaments. The different filaments, which include silicon carbide, aluminum oxide, and aluminum silicate, each have a varying level of abrasiveness and grit. The most crucial aspect of the brush's design is its filling, which determines the applications it can be used for.

Types Of Nylon Brushes Filaments

The bristle type, length, and diameter of nylon brushes all affect their characteristics. The grades of nylon range from nylon 6 to nylon 66, as well as 610, 612, 11, and 12. The numerical designation gives an idea of how many carbon atoms are present in the monomer that is utilized to make nylon strands. The proportion of carbon atoms in nylon is what gives it its special qualities. Each of these varieties has qualities and traits to match particular circumstances, with variations depending on grit, abrasion, toughness, and water absorption.

1. NYLON 6

The attributes of nylon, such as hardness, stiffness, and toughness, along with damping and insulating properties, are all present in nylon 6. When it comes to household brushes, nylon 6 keeps a shiny appearance and finish.

2. NYLON 6.6 OR 66 

The melting point of nylon 66 is 180 °C, higher than that of nylon 6. It is a fantastic option for industrial brushes due to its two properties of heat and abrasion resistance. Nylon 66 is mostly used in dry industrial settings devoid of chemicals. When it comes into contact with water, some of its rigidity is lost.

3. NYLON 610

The least amount of moisture will absorb into nylon 610, which is also stiffer and stronger. It keeps its hardness and resilience to the impacts of cleansers, solvents, and dilute mineral acids when exposed to low temperatures.

4. NYLON 612 

High-performance nylon filament Nylon 612 has notable resistance to chemical adsorption, petroleum compounds, and water. Nylon 612's mechanical characteristics enable it to be molded and tailored to a wide range of applications. The Food and Drug Administration (FDA) has granted its approval for use in food processing and the creation of medical products.

5. NYLON 11

A rare bio-based plastic called Nylon 11 is produced from vegetable oil, primarily from the castor plant. Low water absorption, UV resistance, high strength, and heat resistance are just a few of nylon 11's benefits. It is also unaffected by environmental variables. It possesses high impact resistance, particularly at subfreezing temperatures, and dimensional stability.

6. NYLON 12

Petroleum is used to make Nylon 12. It has superior resistance to abrasion and UV radiation and a low impact rating. Similar to nylon 11, nylon 12 has the least water absorption of all the nylon fibers. Its resistance to chemicals like grease, gasoline, and solvents as well as salt solutions or water is the primary reason why it is used as brush filaments. It is ideally suited for noise suppression applications because of its noise and vibration dampening characteristics.

B. Handle

The many types of handles have an impact on how the brush will be used; some have basic wooden handles, while others include metal cups that can be attached to electrical devices. Metal handles are common on industrial brushes because they can withstand the trauma they encounter while in use. The handles of nylon brushes for cleaning and cosmetics might be made of plastic, metal, wire, or wood. As with brushes, there are many different styles of handles.

Types Of Handles In Assembling Nylon Brushes

The filaments can be attached to the handle using a variety of assembling techniques. How they will be joined depends on the brush's size, the filaments' spacing, and the material selected to make the handle. The major objective of the assembly procedure is to tightly fit the filaments to the handle to prevent any failures, like filaments falling out while being used. Some of the procedures for making brushes with various handles include:

1. Wood Handle

Multiple small batches of filaments are bundled together and placed in a wood handle. On one side of a sizable flat piece of shaped wood, multiple equally spaced holes are bored to construct the handle. The holes are carefully and correctly bored during assembly operations by a programmed machine that also positions the filaments. 

2. Plastic Handle 

Similar techniques to those used for wooden handles can be used to connect filaments to plastic handles. In some circumstances, inserting the filaments while the plastic material is still malleable and soft results in a more secure attachment. The process of solidification guarantees a snug fit.

3. Metal Handles 

Metal handles come in a wide range of forms and styles, such as channel, conventional handles, wire, and tube-like shapes. The filaments are pushed into position under pressure using channel and tube handles. A wire is doubled over for use in nylon wire brushes. Between the folds of the stem are where the filaments are situated. The brush is created by twisting the wire stem.

4. No Handle 

There are many kinds of brushes that are attached directly to power tools or cleaning equipment for use in manufacturing, cleaning, and product finishing. Numerous diameters of cylinders, big flat ovals, wheel shapes, centerless cylinders, cup brushes with or without a shank, and other shapes are among the various combinations.

General Application Of Nylon Brushes

Every form of activity uses nylon wire brushes, whether it's brushing your teeth or removing pollutants like rust, paint, dirt, and grime. Nylon brushes are widely used because of their various grades, grit sizes, combinations, and mechanical characteristics. A few of the applications include:

  • Abrasion - Abrasive nylon brushes are suitable for deburring and finishing tasks because of their abrasive grain.
  • Washing - Nylon washing brushes are ideal for cleaning vehicles, equipment, materials, and machinery.
  • Cleaning - The brushes that we are most familiar with seeing and using for cleaning brushes. They are used to clean up spills and keep surfaces tidy in homes, workplaces, factories, and retail establishments.
  • Application - Application brushes come in a wide variety of shapes and sizes, ranging from artist brushes with a few filaments to very strong, heavy-duty nylon brushes with metal tube handles for applying coatings and acids.
  • Polishing - Nylon polishing brushes are less harsh or abrasive. A liquid is applied to a surface, which gives it a polished appearance and improves its look.
  • Static Eliminator - The conductive qualities of nylon brushes make them suitable for eliminating powder or dust that attracts static electricity.
  • Pipe Cleaning - The inner and outer surfaces of pipes, tubes, and cylinders can be cleaned in several ways using nylon brushes.
  • Conveyors - The design of conveyor cleaning brushes must match the kind of material used to make the conveyor, which may be made of wire mesh, rubber, or urethane. A cylinder brush that can both scrub and dust the belt is the most popular kind of conveyor cleaning tool.
  • Wood Distressing - Wood distressing is a technique for weathering and aging a wood surface to add depth and texture. For eliminating soft grain to provide a rustic appearance, nylon wire brushes with a grit of 46 are a versatile option.

Industrial Applications For Nylon Brushes

1. Aerospace

Nylon brushes are used in the manufacture of aircraft for a variety of tasks, including hydraulic component smoothing, flattening, and deburring aluminum engine heads.

2. Agriculture

In the agricultural sector, brushes are used to increase output and planting effectiveness. Seed and soil are moved evenly and carefully using nylon brushes.

3. Firearm

The primary function of nylon wire brushes in the weapons business is to maintain the dependability, safety, and cleanliness of firearms. For optimum performance, safety, and efficacy, nylon brushes are used for mild cleaning or scrubbing to remove hard-set compounds, metal flakes, loose metals, and debris.

4. Glass Manufacturing

Nylon brushes are employed in the processing of glass to round rough edges, eliminate glass pieces, and polish glass surfaces.

5. Military

The techniques used in aerospace, such as deburring and edge smoothing, flattening and surface smoothing on engines and heavy machinery, and smoothing of hydraulic cylinders, are quite similar to those used in the production of military equipment, which uses nylon brushes.

6. Printing

Nylon wire brushes are used in the printing industry for several tasks. These include the cleaning of printing plates to get rid of any extra or lingering material that can negatively impact a print run.

Nylon brushes have many uses, and those uses are increasing day by day. This article covered all aspects of nylon brushes including their types, production, assembly, uses, and industrial applications.

Previous article 10 Angle Grinder Attachments and Accessories
Next article 7 Facts About Carbide Burrs And How To Use Them

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare